DESIGN OF A Ka-BAND COUPLED MICROSTRIP LINE FERROELECTRIC PHASE SHIFTERS
- 1 December 2005
- journal article
- research article
- Published by Taylor & Francis in Integrated Ferroelectrics
- Vol. 77 (1) , 129-137
Abstract
We report on the design, fabrication and microwave performance of coupled microstrip line phase shifters (CMPS) based on (Ba,Sr)TiO3 (BST) thin films for Ka-band phased array antenna. Single phase BST thin films were deposited by pulsed laser deposition (PLD) on (001) MgO substrates. The CMPS were analyzed and designed by using an exact analysis in terms of even and odd mode phase velocities rather than the approach in which the velocities are averaged. These CMPS were tested in Ka-band, at room temperatures, and between the bias ranges of 0∼200 V. The measured differential phase shift was 458° and the insertion loss varied between 7.8 dB and 10.5 dB at 29 GHz in the bias ranges of 5∼200 V. The CMPS exhibited a figure of merit of about 44°/dB.Keywords
This publication has 7 references indexed in Scilit:
- Coupled Microstrip Line Ferroelectric Phase Shifter for Ka-Band Phased Array AntennaIntegrated Ferroelectrics, 2004
- Ferroelectric Ba 0.6 Sr 0.4 TiO 3 Phase Shifters Under High Power MicrowaveFerroelectrics, 2002
- Fabrication and Characterization of La 2 Ti 2 O 7 Films for Ferroelectric-Gate Field Effect Transistor ApplicationsFerroelectrics, 2002
- Distributed phase shifters using (Ba,Sr)TiO3 thin films on sapphire and glass substratesIntegrated Ferroelectrics, 2001
- Thin-film ferroelectric microwave devicesSuperconductor Science and Technology, 1998
- Modelling of thin-film HTS/ferroelectric interdigital capacitorsIEE Proceedings - Microwaves, Antennas and Propagation, 1996
- Characterization of a tunable thin film microwave YBa2Cu3O7−x/SrTiO3 coplanar capacitorApplied Physics Letters, 1993