Compensation Network Design for WPTS With Independence Coupling Coefficient in CC and CV Modes With ZPA, and Its Simplest Network
- 24 December 2024
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (4) , 6385-6397
Abstract
Wireless power transfer systems (WPTS) have found extensive applications in battery charging. To achieve optimal charging performance, several requirements must be met. First, it is necessary to simultaneously achieve constant current (CC) and constant voltage (CV) charging modes using the same compensation network, while maintaining zero-phase angle (ZPA) at the input impedance. Second, it is desirable for the charging modes to remain unaffected by the coupling coefficient (k). Third, a systematic and straightforward method is needed to design the compensation network topology and parameters. In this article, we propose a novel systematic compensation network design method that fulfills all three requirements for the first time. The method represents the magnetic coupling transformer and the compensation network as a series of cascaded T-type modules. By analyzing the requirements for achieving CC or CV modes with ZPA conditions in the basic T-type module and extending these requirements to multiple T-type modules, the parameters of the compensation network can be determined. This approach enables the identification of a series of compensation networks that simultaneously achieve CC and CV modes with ZPA characteristics, independent of the k. Additionally, we introduce a simplified compensation network, LLCC-S, which satisfies the aforementioned requirements with least compensation components. Numerical simulations and experimental results are provided to validate the effectiveness of the proposed compensation network. The results demonstrate the network's ability to achieve the desired CC and CV modes with ZPA features, irrespective of the k.Keywords
This publication has 32 references indexed in Scilit:
- A Novel Design Method of LCC-S Compensated Inductive Power Transfer System Combining Constant Current and Constant Voltage Mode via Frequency SwitchingIEEE Access, 2021
- Frequency and Parameter Combined Tuning Method of LCC–LCC Compensated Resonant Converter With Wide Coupling Variation for EV Wireless ChargerIEEE Journal of Emerging and Selected Topics in Power Electronics, 2021
- Analysis and Design of an LCCC/S-Compensated WPT System With Constant Output Characteristics for Battery Charging ApplicationsIEEE Journal of Emerging and Selected Topics in Power Electronics, 2020
- A Switching Hybrid LCC-S Compensation Topology for Constant Current/Voltage EV Wireless ChargingIEEE Access, 2019
- Design of Wireless Power Transfer System with Load-Independent Voltage/Current Output based on the Double-Sided CLC Compensation Network2019
- Load-Independent Voltage and Current Transfer Characteristics of High-Order Resonant Network in IPT SystemIEEE Journal of Emerging and Selected Topics in Power Electronics, 2018
- Realization of CC and CV Mode in IPT System Based on the Switching of Doublesided LCC and LCC-S Compensation Network2016
- Hybrid control of inductive power transfer charger for electric vehicles using LCCL-S resonant network in limited operating frequency range2016
- Wireless Power Transfer for Electric Vehicle ApplicationsIEEE Journal of Emerging and Selected Topics in Power Electronics, 2014
- On-Line Electric Vehicle using inductive power transfer system2010