Characteristics of Automotive Glass Waste-Containing Gypsum Bodies Made from Used Plaster Mould
Authors:
- 1 April 2014
- journal article
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 608, 91-96
Abstract
This work focuses on characterization of gypsum building materials based on used plaster mould and automotive safety glass waste. The used plaster mould was another source of relatively high purity calcium sulfate. Meanwhile, automotive print-screened glass waste derived from glass machining processes and sedimented as a lump of glass powder was rich in silica. The used mould was ground and calcined in order to convert gypsum dihydrate into hemihydrate while the glass lump was dried and become loose cullet powder. The waste materials were thoroughly mixed and cast into blocks, using used plaster mould. Various glass waste contents from 0, 5, 10, 15 to 20 %wt were employed as a filler. Chemical compositions of the mix were carefully characterized. Phase content microstructural features were also determined. Development in compressive strength as well as water resistance were investigated. The experimental works showed that the addition of the glass waste in the used plaster mould containing gypsum bodies could comparatively improve both strength and water insolubility.Keywords
This publication has 10 references indexed in Scilit:
- Effects of Diatomite and Glass Cullet in the Waste-Based Gypsum Building MaterialsKey Engineering Materials, 2013
- Modified gypsum compounds: An ecological–economical choice to improve traditional plastersConstruction and Building Materials, 2012
- Waste gypsum from intermediate dye industries for production of building materialsConstruction and Building Materials, 2010
- A review on the use of waste glasses in the production of cement and concreteResources, Conservation and Recycling, 2007
- Utilization of waste glass in ECO-cement: Strength properties and microstructural observationsWaste Management, 2007
- Characteristics and pozzolanic reactivity of glass powdersCement and Concrete Research, 2005
- Sonochemical synthesis of ettringite from a powder mixture suspended in waterPowder Technology, 2000
- Strength and water absorption for gypsum—cement—silica fume blends of improved performanceAdvances in Cement Research, 1998
- Prefabricated building elements based on FGD gypsum and ashes from coal-fired electric generating plantsMaterials and Structures, 1996
- Gypsum of improved performance using blends with Portland cement and silica fumeAdvances in Cement Research, 1994