Optimum Arrangement Design of Mastic Ropes for Membrane-Type LNG Tanks Considering the Flatness of Thermal Insulation Panel and Production Cost
Open Access
- 16 May 2020
- journal article
- research article
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 8 (5) , 353
Abstract
Thermal insulation panels are installed on the inner walls of liquefied natural gas (LNG) tanks of an LNG carrier to maintain the cryogenic temperature. Mastic ropes are used to attach thermal insulation panels to the inner walls and to fill the gap between the walls and panels. Because the inner walls of the LNG tanks can be corrugated owing to production errors, a large amount of mastic ropes are required to maintain the flatness of the thermal insulation panels. Therefore, in this study, an optimization method is proposed to minimize the total amount of mastic ropes for satisfying the flatness criterion of thermal insulation panels. For this purpose, an optimization problem is mathematically formulated. An objective function is used to minimize the total amount of mastic ropes considering constraints to flatten the thermal insulation panels. This function is applied to the design of membrane-type LNG tanks to verify the effectiveness and feasibility of the proposed method. Consequently, we confirm that the proposed method can provide a more effective arrangement design of mastic ropes compared with manual design.Keywords
This publication has 17 references indexed in Scilit:
- Pressure resistance of the corrugated stainless steel membranes of LNG carriersOcean Engineering, 2011
- Structural Response to Sloshing Excitation in Membrane LNG TankJournal of Offshore Mechanics and Arctic Engineering, 2010
- Fatigue strength assessment of MARK-III type LNG cargo containment systemOcean Engineering, 2010
- Scantling multi-objective optimisation of a LNG carrierMarine Structures, 2010
- Experimental investigation on the impact behavior of membrane-type LNG carrier insulation systemJournal of Loss Prevention in the Process Industries, 2009
- Consistent thermal analysis procedure of LNG storage tankSTRUCTURAL ENGINEERING AND MECHANICS, 2007
- A fast and elitist multiobjective genetic algorithm: NSGA-IIIEEE Transactions on Evolutionary Computation, 2002
- An efficient global-local hybrid optimisation method using design sensitivity analysisInternational Journal of Vehicle Design, 2002
- Optimized LNG Storage Tanks for Fleet-Size Refueling Stations with Local LNG Liquefiers1998
- Nonlinear programming and nonsmooth optimization by successive linear programmingMathematical Programming, 1989