Effect of filament drawdown on aerodynamic drag and heat transfer in fiber spinning
Author:
- 19 April 2004
- journal article
- fluid mechanics-and-transport-phenomena
- Published by Wiley in AIChE Journal
- Vol. 50 (5) , 898-905
Abstract
The momentum and thermal boundary layer equations are solved numerically to assess the effects of filament drawdown on aerodynamic drag and heat transfer in melt fiber spinning. It is found that, relative to the case without drawdown (constant filament velocity and diameter), the aerodynamic drag on the filament increases substantially, but the heat transfer rate is suppressed. Moreover, the air velocity profile eventually becomes fully developed (unlike the zero drawdown case), and the (velocity) boundary layer thickness, rather than continuing to grow with distance beneath the spinneret, eventually becomes proportional to the filament diameter, and thus decreases with increasing axial distance. Quantitative results are presented for the dimensionless drag force per unit length along the filament (the Drag number) and the Nusselt number as functions of the dimensionless axial distance and a new dimensionless parameter, the Drawdown Reynolds number. © 2004 American Institute of Chemical Engineers AIChE J, 50: 898–905, 2004Keywords
This publication has 8 references indexed in Scilit:
- Correlations for Transport Coefficients in Textile Fiber SpinningIndustrial & Engineering Chemistry Research, 1996
- A finite element analysis of the upper jet region of a fiber drawing flow field of a temperature-sensitive materialInternational Journal of Heat and Mass Transfer, 1984
- Air Drag on a Continuous Filament in Melt SpinningTransactions of the Society of Rheology, 1976
- Heat transfer through the axially symmetric boundary layer on a moving circular fibreInternational Journal of Heat and Mass Transfer, 1970
- Studies on melt spinning. II. Steady‐state and transient solutions of fundamental equations compared with experimental resultsJournal of Applied Polymer Science, 1967
- Boundary‐layer behavior on continuous solid surfaces: III. The boundary layer on a continuous cylindrical surfaceAIChE Journal, 1961
- Boundary‐layer behavior on continuous solid surfaces: II. The boundary layer on a continuous flat surfaceAIChE Journal, 1961
- The axisymmetric boundary layer on a long thin cylinderProceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 1955