Bond strength of metal–ceramic systems in three‐point flexure bond test
Authors:
- 1 March 1995
- journal article
- research article
- Published by Wiley in Journal of Applied Biomaterials
- Vol. 6 (1) , 55-64
Abstract
This study deals with a three‐point flexure test for the metal‐ceramic bond involving geometrically simple specimens (alloy strips partly coated with ceramic) that can be fabricated with reasonable expenditure and sufficient reproducibility. The calculation of the stress distribution in such specimens with the aid of the finite‐element method (FEM) is presented. The aim of this numerical analysis is: to investigate the stress distribution in a ceramometallic specimen with dimensions that, in a large number of experiments, have proven to lead to debonding at one end of the ceramic veneer instead of a crack in the middle of the veneer; and to assign a bond strength to the measured critical bending force that takes into account the influence of the Young's modulus of the alloy as well as a possible deviation of the thickness of the metal substrate from the standard value. Bond strength values of a variety of metal‐ceramic combinations are demonstrated. These experimental results demonstrate the reproducibility of the test method as well as its sensitivity to diverse parameters. The presented method is proposed as an alternative to another flexure bond test nominated for international standard. In this test ceramometallic strips are bent over a rod to a 90° angle of the specimen ends, subsequently flattened, and the fracture surface visually inspected for adherence of the ceramic to the alloy substrate along the predominant part of the middle third of the specimen. It is clear that such a test can at most deliver qualitative results. © 1995 John Wiley & Sons, Inc.Keywords
This publication has 11 references indexed in Scilit:
- Apparent bond strength of nonnoble alloy-porcelain combinationsThe Journal of Prosthetic Dentistry, 1985
- A simple shear test to evaluate the bond strength of ceramic fused to metalAustralian Dental Journal, 1980
- Materials ScienceJournal of Dental Research, 1980
- Adherence of a nickel-chromium alloy and porcelainThe Journal of Prosthetic Dentistry, 1979
- An evaluation of four variables affecting the bond strength of porcelain to nonprecious alloyThe Journal of Prosthetic Dentistry, 1977
- The strength of metal-ceramic bonds with base metals containing chromium. A preliminary reportBritish Dental Journal, 1972
- Shear Test for Measuring Bonding in Cast Gold Alloy-Porcelain CompositesJournal of Dental Research, 1970
- Variables Affecting the Strength of Bond between Porcelain and GoldJournal of Dental Research, 1966
- Study of the Bond between Gold Alloys and PorcelainJournal of Dental Research, 1962
- An evaluation and comparison of porcelains fused to cast metalsThe Journal of Prosthetic Dentistry, 1960