Effects of Material Properties on Angular Distortion in Wire Arc Additive Manufacturing: Experimental and Computational Analyses
Open Access
Abstract
In wire arc additive manufacturing (AM), as in arc welding, arc heat thermally deforms substrates and articles. For industrial applications, deformation characteristics of various materials must be understood and appropriate materials and methods of reducing deformation must be devised. Therefore, angular distortions of different materials were investigated through bead-on-plate welding and finite element analysis. A model that simplifies temperature-dependent properties was developed to establish relationships between thermomechanical properties and angular distortion. A simplified model of temperature-dependent properties was used, and angular distortion characteristics were extensively investigated for different material properties and heat inputs. Coefficient of thermal expansion, density, and specific heat all notably affected angular distortion depending on heat input conditions. Results showed that during wire arc AM, flatness of both substrates and articles could vary depending on material properties, heat input, substrate thickness, and bead accumulation. Study findings can provide insight into deformation characteristics of new materials and how to mitigate thermal distortions.Keywords
This publication has 12 references indexed in Scilit:
- Effect of Welding Process Conditions on Angular Distortion Induced by Bead-on-plate WeldingISIJ International, 2018
- Mitigation of thermal distortion during additive manufacturingScripta Materialia, 2017
- Ultrastructural Characterization of the Lower Motor System in a Mouse Model of Krabbe DiseaseScientific Reports, 2016
- Printability of alloys for additive manufacturingScientific Reports, 2016
- Experimental and Numerical Investigation of Trailing Heat Sink Effect on Weld Residual Stress and Distortion of Austenitic Stainless SteelISIJ International, 2016
- Welding Residual Stress and Strength of Thick 9% Nickel Steel PlateJournal of Power System Engineering, 2014
- Residual stress and distortion calculation of laser beam welding for aluminum lap jointsJournal of Materials Processing Technology, 2008
- Influence of material properties on the laser-forming process of sheet metalsJournal of Materials Processing Technology, 2005
- Effects of temperature-dependent material properties on welding simulationComputers & Structures, 2002
- Heat Flow in Weldments1980