Magnetic Magnetite-Graphene Oxide (Fe3O4-GO) Nanocomposites for Removal of Dyes from Aqueous Solution
Open Access
- 23 April 2024
- journal article
- research article
- Published by Springer Nature in Journal of Inorganic and Organometallic Polymers and Materials
- Vol. 34 (9) , 4192-4202
Abstract
Magnetic magnetite-graphene oxide (Fe3O4-GO) was synthesized using an in-situ precipitation technique and applied in the adsorption of cationic rhodamine B (RhB) and anionic methyl orange (MO) dyes from aqueous solution. The nanocomposite was characterized by different techniques including FTIR, XRD, Raman, XPS, PPMS, BET, SEM and TEM techniques. Batch adsorption studies were conducted to investigate the effect of solution pH, initial metal ion concentration, adsorbent dosage and contact time. The synthesized Fe3O4-GO exhibited characteristic magnetic properties (saturation magnetization of 34 emu/g) and it separated from aqueous solution with ease through the application of an external magnetic field. The adsorption equilibrium time on the adsorption of RhB and MO onto Fe3O4-GO showed best removal of 99.12% for RhB after 60 min, while MO was removed efficiently after 120 min with a removal efficiency of 97.60%. The adsorption of the azo dyes followed the pseudo-second-order kinetics model with high correlation coefficients (0.99995) for RhB and (0.99925) for MO. Maximum removal of the dye pollutants by occurred at pH 8 for RhB and pH 4 for MO, while the optimal adsorbent dosage was 30 mg. The results showed that adsorption equilibrium data were fitted to Langmuir isotherm model and maximum monolayer adsorption capacities for RhB and MO at 70.64 and 15.94 mgg−1, respectively. The magnetic adsorbents were reused for a maximum of 7 cycles and showed reasonable stability and reproducibility. Furthermore, the results showed that Fe3O4-GO nanocomposite can be used as an effective material in the removal of dyes from wastewater.Keywords
Funding Information
- Durban University of Technology
This publication has 43 references indexed in Scilit:
- Synthesis, Characterisations, Adsorptive Performances and Photo-catalytic Activity of Fe3O4-SiO2 Based Nanosorbent (Fe3O4-SiO2 BN)Journal of Inorganic and Organometallic Polymers and Materials, 2020
- Magnetic graphene TiO2-based photocatalyst for the removal of pollutants of emerging concern in water by simulated sunlight aided photocatalytic ozonationApplied Catalysis B: Environment and Energy, 2020
- Preparation and Characterization of Polyvinylpyrrolidone/Polysulfone Ultrafiltration Membrane Modified by Graphene Oxide and Titanium Dioxide for Enhancing Hydrophilicity and Antifouling PropertiesJournal of Inorganic and Organometallic Polymers and Materials, 2019
- Adsorption of Eosin Y, methyl orange and brilliant green from aqueous solution using ferroferric oxide/polypyrrole magnetic compositePolymer Bulletin, 2019
- Developing stretchable and graphene-oxide-based hydrogel for the removal of organic pollutants and metal ionsApplied Catalysis B: Environment and Energy, 2018
- Catalytic evaluation of mesoporous metal oxides for liquid phase oxidation of styreneApplied Catalysis A: General, 2018
- Equilibrium, Kinetic and Thermodynamic Study of Magnetic Polyaniline/Graphene Oxide Based Nanocomposites for Ciprofloxacin Removal from WaterJournal of Inorganic and Organometallic Polymers and Materials, 2018
- Water Soluble Schiff Base Functinalized Fe3O4 Magnetic Nano-Particles as a Novel Adsorbent for the Removal of Pb(II) and Cu(II) Metal Ions from Aqueous SolutionsJournal of Inorganic and Organometallic Polymers and Materials, 2017
- Synthesis of poly(styrene-co-methacrylic acid)-coated magnetite nanoparticles as effective adsorbents for the removal of crystal violet and Rhodamine B: a comparative studyPolymer Bulletin, 2016
- Graphene oxide and its application as an adsorbent for wastewater treatmentJournal of Chemical Technology & Biotechnology, 2013