Study of Si Nanowires Produced by Metal-Assisted Chemical Etching as a Light-Trapping Material in n-type c-Si Solar Cells
Open Access
- 10 September 2018
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 3 (9) , 10898-10906
Abstract
Si nanowires (SiNWs) produced by metal-assisted chemical etching on n-type Si were investigated for their use as a light-trapping material in c-Si solar cells. The nanowires were fabricated before junction formation (on a lightly doped Si substrate) so that their core was bulk and nonporous. The above fabrication process was implemented in solar cell fabrication. The SiNW reflectivity was tested at different steps of solar cell processing and found to be lower than that of conventional random pyramids used in c-Si solar cells. Contact formation on the front side of the cell was investigated by considering metal deposition either directly on the nanowires or on bulk areas in between the nanowire areas. The superiority of this second case was demonstrated. Three different Si nanowire lengths were investigated, namely, 0.5, 1, and 1.5 μm, the case of 1 μm giving better results in terms of solar cell characteristics and external quantum efficiency. The electronic quality of the Si nanowire surface was investigated using the corresponding metal-oxide-semiconductor capacitors with atomic-layer-deposited alumina dielectric. Successful reduction of surface recombination centers at the large Si nanowire surface was achieved by reducing structural defects at their surface through a specific chemical treatment. Finally, using the determined optimized conditions for Si nanowire formation, chemical cleaning, and process implementation in solar cell fabrication, we demonstrated ∼45% increase in solar cell efficiency with 1 μm SiNWs compared to that from a flat reference cell processed under similar conditions. The above study was made on test solar cells without surface passivation.Keywords
Funding Information
- European Cooperation in Science and Technology (MP1406)
This publication has 31 references indexed in Scilit:
- Structure, morphology, and photoluminescence of porous Si nanowires: effect of different chemical treatmentsDiscover Nano, 2013
- High K Nanophase Zinc Oxide on Biomimetic Silicon Nanotip Array as SupercapacitorsNano Letters, 2013
- N-type Black Silicon Solar CellsEnergy Procedia, 2013
- Ultra high density three dimensional capacitors based on Si nanowires array grown on a metal layerApplied Physics Letters, 2012
- Si nanowires by a single-step metal-assisted chemical etching process on lithographically defined areas: formation kineticsDiscover Nano, 2011
- Realization of ultra dense arrays of vertical silicon nanowires with defect free surface and perfect anisotropy using a top-down approachMicroelectronic Engineering, 2011
- Fabrication of silicon nanopillar-based nanocapacitor arraysApplied Physics Letters, 2010
- Light Emission from Silicon Nanostructures Produced by Conventional Lithographic and Reactive Ion Etching TechniquesPhysica Status Solidi (b), 1995
- Visible luminescence from one- and two-dimensional silicon structures produced by conventional lithographic and reactive ion etching techniquesApplied Physics Letters, 1995
- A single-frequency approximation for interface-state density determinationSolid-State Electronics, 1980