A neural network approach to the calibration of a flush air data system
Authors:
- 1 February 2001
- journal article
- research article
- Published by Cambridge University Press (CUP) in The Aeronautical Journal
- Vol. 105 (1044) , 85-95
Abstract
A flush air data system uses surface pressure measurements to obtain speed and aerodynamic orientation of a flight vehicle. This paper investigates the use of a neural network to calibrate the air data system on a low-observable aircraft forebody with 22 pressure tappings. Wind tunnel data were obtained for between 0 and 25° angle of attack, 0 to 10° sideslip for speeds of 32, 37 and 45ms-1. Experimental data were used to train multilayer perceptron neural networks. A calibration accuracy of 0·322ms-1, 0·811° and 0·552° for speed, alpha and beta respectively was achieved just using the first five tappings on the nose cone. Increasing the number of tappings used as inputs to the neural network reduces the calibration error. A neural network with 22 inputs gives a best accuracy of 0·095ms-1, 0·15° and 0·085° for speed, α and β respectively. Trained networks show poor robustness to single sensor failures. Robustness is improved by preprocessing input data with an autoassociative network or by introducing sensor redundancy.Keywords
This publication has 4 references indexed in Scilit:
- Seven-Hole Pressure Probe Calibration Method Utilizing Look-Up Error TablesAIAA Journal, 1999
- Miniature Multihole Pressure Probes and Their Neural-Network-Based CalibrationAIAA Journal, 1999
- Application of Neural Networks and Fuzzy Logic to the Calibration of the Seven-Hole ProbeJournal of Fluids Engineering, 1998
- Approximation theory and feedforward networksNeural Networks, 1991