Thermal and Flow Characteristics in a Concentric Annular Heat Pipe Heat Sink
Open Access
Abstract
A concentric annular heat pipe heat sink (AHPHS) was proposed and fabricated to investigate its thermal behavior. The present AHPHS consists of two concentric pipes of different diameters, which create vacuumed annular vapor space. The main advantage of the AHPHS as a heat sink is that it can largely increase the heat transfer area for cooling compared to conventional heat pipes. In the current AHPHS, condensation takes place along the whole annular space from the certain heating area as the evaporator section. Therefore, the whole inner space of the AHPHS except the heating area can be considered the condenser. In the present study, AHPHSs of different diameters were fabricated and studied experimentally. Basic studies were carried out with a 50 mm-long stainless steel AHPHS with diameter ratios of 1.1 and 1.3 and the same inner tube diameter of 76 mm. Several experimental parameters such as volume fractions of 10–70%, different air flow velocity, flow configurations, and 10–50 W heat inputs were investigated to find their effects on the thermal performance of an AHPHS. Experimental results show that a 10% filling ratio was found to be the optimum charged amount in terms of temperature profile with a low heater surface temperature and water as the working fluid. For the methanol, a 40% filling ratio shows better temperature behavior. Internal working behavior shows not only circular motion but also 3-D flow characteristics moving in axial and circular directions simultaneously.Keywords
Funding Information
- Ministry of Trade, Industry & Energy (MOTIE), Korea Institute for Advancement of Technology (KIAT) (P0006674)
This publication has 15 references indexed in Scilit:
- Flow visualization and heat transfer performance of annular thermosyphon heat pipeApplied Thermal Engineering, 2017
- Heat pipe based systems - Advances and applicationsEnergy, 2017
- Heat Pipes for Computer Cooling Applications2016
- Design, construction, and performance testing of an isothermal naphthalene heat pipe furnaceReview of Scientific Instruments, 2014
- Review and Advances in Heat Pipe Science and TechnologyJournal of Heat Transfer, 2012
- Construction of Sodium Heat-Pipe Furnaces and the Isothermal Characteristics of the FurnacesInternational Journal of Thermophysics, 2011
- A Review of Concentric Annular Heat PipesHeat Transfer Engineering, 2005
- An experimental study on the thermal performance of a concentric annular heat pipeJournal of Mechanical Science and Technology, 2005
- Performance Characteristics of a Concentric Annular Heat Pipe: Part II—Vapor Flow AnalysisJournal of Heat Transfer, 1989
- Performance Characteristics of a Concentric Annular Heat Pipe: Part I—Experimental Prediction and Analysis of the Capillary LimitJournal of Heat Transfer, 1989