Phase-Inverted Copolymer Membrane for the Enhancement of Textile Supercapacitors
Open Access
Abstract
This paper presents a universal fabrication process for single-layer textile supercapacitors, independent of textile properties such as weave pattern, thickness and material. To achieve this, an engineered copolymer membrane was fabricated within these textiles with an automated screen printing, phase inversion and vacuum curing process. This membrane, together with the textile yarns, acts as a porous, flexible and mechanically durable separator. This process was applied to four textiles, including polyester, two polyester-cottons and silk. Carbon-based electrodes were subsequently deposited onto both sides of the textile to form the textile supercapacitors. These supercapacitors achieved a range of areal capacitances between 3.12 and 38.2 mF·cm−2, with energy densities between 0.279 and 0.681 mWh·cm−3 with average power densities of between 0.334 and 0.32 W·cm−3. This novel membrane facilitates the use of thinner textiles for single-layered textile supercapacitors without significantly sacrificing electrochemical performance and will enable future high energy density textile energy storage, from supercapacitors to batteries.Keywords
Funding Information
- United State Army (W911NF2010324, EP/P010164/1, EP/L016818/1)
- Engineering and Physical Sciences Research Council (W911NF2010324, EP/P010164/1, EP/L016818/1)
- Royal Academy of Engineering (W911NF2010324, EP/P010164/1, EP/L016818/1)
This publication has 34 references indexed in Scilit:
- Highly porous and easy shapeable poly-dopamine derived graphene-coated single walled carbon nanotube aerogels for stretchable wire-type supercapacitorsCarbon, 2018
- A new approach to compatibilization study of EVA/PMMA polymer blend used as an optical fibers adhesive: Mechanical, morphological and thermal propertiesInternational Journal of Adhesion and Adhesives, 2018
- High-performance textile supercapacitor electrode materials enhanced with three-dimensional carbon nanotubes/graphene conductive network and in situ polymerized polyanilineElectrochimica Acta, 2017
- A Low‐Cost, Self‐Standing NiCo2O4@CNT/CNT Multilayer Electrode for Flexible Asymmetric Solid‐State SupercapacitorsAdvanced Functional Materials, 2017
- High performance disulfonated poly(arylene ether sulfone)/poly(ethylene oxide) composite membrane used as a novel separator for supercapacitor with neutral electrolyte and activated carbon electrodesHigh Performance Polymers, 2016
- Understanding and guiding the phase inversion process for synthesis of solvent resistant nanofiltration membranesJournal of Applied Polymer Science, 2015
- A review on electrospinning for membrane fabrication: Challenges and applicationsDesalination, 2015
- Progress in electrical energy storage system: A critical reviewProgress in Natural Science: Materials International, 2009
- PVDF/PMMA brushes membrane for lithium‐ion rechargeable batteries prepared via preirradiation grafting techniqueJournal of Polymer Science Part B: Polymer Physics, 2008
- Mechanical properties and strain-rate effect of EVA/PMMA in situ polymerization blendsEuropean Polymer Journal, 2004