Effect of Fiber Content on Abrasive Wear Behavior of Date Palm Leaf Reinforced Polyvinyl Pyrrolidone Composite
Open Access
- 22 January 2014
- journal article
- research article
- Published by Hindawi Limited in ISRN Tribology
- Vol. 2014, 1-10
Abstract
The effect of fiber contents on wear behavior of date palm leaf reinforced polyvinyl pyrrolidone (PVP/DPL) composites has been experimentally investigated. The test samples with fillers in 10, 20, 30, and 40% based on weight of fibers were prepared using injection molding. The optimum fiber content (i.e., 26 wt%) for maximum mechanical strength of the composites was determined by regression analysis. The dry sliding wear tests were conducted for each composition at different sliding velocities (0.392, 0.471, and 0.549 m/s) and sliding distances (188, 254, and 376 m) by applying normal loads of 5, 10, 15, and 20 N using pin-on-disc wear testing machine. The specific wear rate, wear loss, and coefficient of friction were plotted against the normal load and sliding distance at all sliding velocities. The results reveal that incorporation of date palm leaf fibers leads to significant improvement in the wear resistance of composites up to optimum fiber content and then decreases as fiber content increases. Further, it is found that surface modification has significant effect on wear performance. Worn surfaces of some selected samples were studied by scanning electron microscopy to analyze the wear mechanism.Keywords
This publication has 27 references indexed in Scilit:
- Dry sliding wear behavior of SiC/Al2O3 filled jute/epoxy compositesMaterials & Design (1980-2015), 2012
- Suitability of using coir fiber/polymeric composite for the design of liquid storage tanksMaterials & Design (1980-2015), 2012
- Influence of the sampling area of the stem on the mechanical properties of hemp fibersMaterials Letters, 2011
- Failure strain as the key design criterion for fracture of natural fibre compositesComposites Science and Technology, 2010
- Enhancement of tensile strength of lignocellulosic jute fibers by alkali-steam treatmentBioresource Technology, 2010
- Physico-mechanical properties of chemically treated palm and coir fiber reinforced polypropylene compositesBioresource Technology, 2009
- Pretreatments of natural fibers and their application as reinforcing material in polymer composites—A reviewPolymer Engineering & Science, 2009
- High-stress three-body abrasive wear of treated and untreated oil palm fibre-reinforced polyester compositesProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2008
- Date palm fibre reinforced composite as a new insulating materialInternational Journal of Energy Research, 2003
- Effects of fibre treatment on wettability and mechanical behaviour of flax/polypropylene compositesComposites Science and Technology, 2003