Experimental and analytical investigation on the nonlinear behaviors of glulam moment-resisting joints composed of inclined self-tapping screws with steel side plates
Authors:
- 28 June 2019
- journal article
- research article
- Published by SAGE Publications in Advances in Structural Engineering
- Vol. 22 (15) , 3190-3206
Abstract
Glulam moment-resisting joint composed of inclined self-tapping screws with steel side plates were designed and its nonlinear moment-rotational skeleton curve was predicted by taking nonlinear load (P)–deformation (u) relationships of all moment-resisting components into considerations within step-wise linear calculation process. P-u relationships of all moment-resisting components were estimated by the fundamental shear joint tests or appropriate empirical relationships, and they were approximated by the tetra polygonal line curves or bi-linear curves. The extended Normalized Characteristic Loop model, which was originally developed for reinforced concrete construction, was applied to describe the hysteresis loops. For predicting failure load, the design equations for a mechanical joint loaded with inclination to the grain direction were applied. Three replications of T-shaped beam-column joint specimens were fabricated using Canadian spruce glulam beam and column. Connections of steel plates to glulam members were all composed of full-threaded inclined self-tapping screws. Static push-pull cyclic loading tests were conducted and observed behaviors were compared with step-wise linear analytical results. Agreements between predicted nonlinear behaviors and observed ones were good on the whole.Keywords
Funding Information
- National Natural Science Foundation of China (31670566)
This publication has 8 references indexed in Scilit:
- Probabilistic models for the withdrawal behavior of single self-tapping screws in the narrow face of cross laminated timber (CLT)European Journal of Wood and Wood Products, 2017
- Stiffness model for inclined screws in shear-tension mode in timber-to-timber jointsEngineering Structures, 2017
- Development of stiffer and ductile glulam portal frameAIP Conference Proceedings, 2017
- Withdrawal resistance of self-tapping screws in unidirectional and orthogonal layered timber productsMaterials and Structures, 2013
- Theoretical and experimental analysis of timber-to-timber joints connected with inclined screwsConstruction and Building Materials, 2010
- A UNIVERSAL MODELING METHOD FOR WOODEN SHEAR/NONSHEAR WALLSJournal of Structural and Construction Engineering (Transactions of AIJ), 2009
- Seismic design of glulam structuresBulletin of the New Zealand Society for Earthquake Engineering, 1993
- RESTOREING FORCE CHARACTERISTICS OF REINFORCED CONCRETE ASEISMATIC ELEMENTS (Part 1) : Restoreing Force Characteristics and ModelizationTransactions of the Architectural Institute of Japan, 1972