A Distortion Model of Laser Sheet for a Laser Line Scanner With Large Fan Angle
- 28 August 2019
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 67 (8) , 6986-6995
Abstract
This article proposes an analytical method of computing distorted laser sheet of a laser line scanner and compensating it. In this article, a distortion model of laser sheet generated from a laser line scanner with large fan angle is derived from physical principles to achieve accurate depth perception even around its edges on which significant depth estimation errors occur in existing algorithms. From a laser beam incident obliquely on a contact surface of two cylindrical lenses, a curved laser sheet is expressed in terms of the nonzero incident angle by the laws of geometrical optics. From the mathematical model of the distorted laser sheet, the incident angle is estimated through an optimization technique and then its estimate is used for depth computation. It is shown through simulations and experiments that the proposed distortion model enables a proper compensation scheme and hence the distortion-compensated depth estimation errors are reduced all over the range of interest, specially much around the both side edges of the laser sheet. Quantitatively in comparison to the compensation-free method, the depth estimation error is improved from 225 to 28 mm on average and from 1781 to 187 mm for worst-case scenarios near edges of a laser sheet.Keywords
Funding Information
- Industrial Fundamental Technology Development Program of the Ministry of Trade, Industry and Energy, South Korea (10062312)
- Institute for Information and Communications Technology Promotion
- Ministry of Science and ICT (2019-0-00762)
- Next-Generation Multistatic Radar Imaging System for Smart Monitoring
This publication has 30 references indexed in Scilit:
- Simultaneous calibration of the intrinsic and extrinsic parameters of structured-light sensorsOptics and Lasers in Engineering, 2014
- Improving the Accuracy of Laser Scanning for 3D Model Reconstruction Using Dithering TechniqueProcedia Technology, 2014
- Calibration of double stripe 3D laser scanner systems using planarity and orthogonality constraintsDigital Signal Processing, 2014
- A simple calibration method for structured light-based 3D profile measurementOptics & Laser Technology, 2013
- Estimation of the uncertainty for a phase noise optoelectronic metrology systemPhysica Scripta, 2012
- The uncertainty associated with the weighted mean frequency of a phase-stabilized signal with white phase noiseMetrologia, 2009
- Implementation of 3D Optical Scanning Technology for Automotive ApplicationsSensors, 2009
- Evolution of modern approaches to express uncertainty in measurementMetrologia, 2007
- Triangulation model taking into account light sheet curvatureMeasurement Science and Technology, 2006
- Automatic teaching of welding robot for free-formed seam using laser vision sensorOptics and Lasers in Engineering, 1999