Mathematical modeling and experimental studies of twin‐screw extrusion of filled polymers
- 1 June 1999
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 39 (6) , 1139-1151
Abstract
Extrusion of filled polymer is commonly employed in diverse industries including compounding operations. The analysis of extrusion of filled polymers is complicated especially by the ubiquitous viscoplasticity and wall slip of the filled polymers. Furthermore, the role played by entrainment of air in the processor, the continuously evolving microstructure, and hence the rheological behavior of the filled polymer in the mixing volume of the extruder and the flow instabilities associated with the converging flows involving the filtration of the binder polymer present additional challenges to the analysis. Specialized techniques are also necessary to quantitatively describe the dispersive and the distributive degree of mixing of the compound. The principal tasks of this study included the collection of experimental data from twin‐screw extrusion using an instrumented and industrial‐scale co‐rotating extruder in conjunction with a well‐characterized filled polymer, which exhibits viscoplasticity and wall slip. The process allowed the adequate mixing of the ingredients and the removal of its air content. Next, the processing data were compared with the results of numerical simulation using the Finite Element Method. The predictions compared favorably with the experimental temperature and pressure distributions obtained under different sets of operating conditions. The distributive degree of mixing (spatial homogeneity) of the filled polymer upon exit from the die was also characterized employing a wide angle X‐ray diffraction technique in spite of the amorphous nature of both the filler and the binder polymer, i.e., hollow glass spheres and poly(dimethyl siloxane) polymer.Keywords
This publication has 38 references indexed in Scilit:
- A New Approach to Simulation of Die Flow which Incorporates the Extruder and Rotating Screw Tips in the AnalysisInternational Polymer Processing, 1997
- Degree of Mixing Analyses of Concentrated Suspensions by Electron Probe and X-Ray DiffractionRubber Chemistry and Technology, 1993
- Flow in a Modular Intermeshing Co-rotating Twin Screw ExtruderInternational Polymer Processing, 1989
- Non-Newtonian flow modelling in the screw regions of an intermeshing corotating twin screw extruderJournal of Non-Newtonian Fluid Mechanics, 1989
- Development of experimental techniques and simulation methods to analyze mixing in co‐rotating twin screw extrusionAdvances in Polymer Technology, 1988
- Improved Model of Flow in the Kneading Disc Region of an Intermeshing Co-Rotating Twin Screw ExtruderInternational Polymer Processing, 1988
- Twin screw extruders; development of technology and analysis of flowAdvances in Polymer Technology, 1987
- Isothermal flow of viscous liquids in corotating twin screw devicesPolymer Engineering & Science, 1980
- The influence of the axial pressure gradient on flow rate for Newtonian liquids in a self wiping, co‐rotating twin screw extruderPolymer Engineering & Science, 1980
- Geometry of fully wiped twin‐screw equipmentPolymer Engineering & Science, 1978