Studies on Polymer-Wood Interface Bonding: Effect of Coupling Agents and Surface Modification
Authors:
- 1 June 1999
- journal article
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 33 (12) , 1064-1079
Abstract
Mechanical properties of composites are a direct function of the interface bonding between strengthening fiber and the matrix. This study investigates the influence of surface modification of wood chips and presence of different interface coupling agents on the interface bonding of wood-polyethylene composites. Single wood-polyethylene interfaced samples were prepared by introducing extruded polyethylene from a twin extruder to bond to the rip surface of a rod-shaped wood specimen. Sodium hydroxide and sulfuric acid were used as surface modifiers for wood. The bond-modifying properties of three silane coupling agents were investigated. The coupling agents used were vinyltrimethoxysilane, 98%, 3-(tri-methoxysilyl)propylmethacrylate, 97%, and 3-glycidoxypropyltrimethoxy silane, 96%. Direct measurement of the interfacial bond strength was carried out using an Instron tensile test machine. Individually, the acidic modifier showed adverse effect on the interface. However, sodium hydroxide improved the interface bonding and enhanced the bond strength by a factor of 1.3 to 1.5. Basically, all of the coupling agents individually increased the interface bonding; vinyltrimethoxysilane, (H2C=CHSi(OCH3)3), had the greatest effect. Also, surface modifiers and coupling agents applied together showed a synergistic effect which contributed to an improved polymer/woodstock interface bond.Keywords
This publication has 19 references indexed in Scilit:
- Studies on Mechanical Properties of Wood-Polymer CompositesJournal of Composite Materials, 1997
- Composites from compounding wood fibers with recycled high density polyethylenePolymer Engineering & Science, 1990
- Influence of phthalic anhydride as a coupling agent on the mechanical behavior of wood fiber–polystyrene compositesJournal of Applied Polymer Science, 1990
- The effect of chemical treatment of wood and polymer characteristics on the properties of wood–polymer compositesJournal of Applied Polymer Science, 1989
- Use of wood fibers in thermoplastics. VII. The effect of coupling agents in polyethylene–wood fiber compositesJournal of Applied Polymer Science, 1989
- Cellulose fiber‐polyester composites with reduced water sensitivity (1)—chemical treatment and mechanical propertiesPolymer Composites, 1987
- Surface modification of cellulose fibers III. Durability of cellulose–polyester composites under environmental agingJournal of Applied Polymer Science, 1986
- The Efficiency of Cellulosic Fillers in Common Thermoplastics. Part II. Filling with Processing Aids and Coupling AgentsInternational Journal of Polymeric Materials and Polymeric Biomaterials, 1985
- Contribution to the micromechanical interpretation of fracture work of short-fibre-reinforced thermoplasticsComposites Science and Technology, 1985
- Dichroism of poly(ethylene terephthalate)‐disperse dye systemJournal of Applied Polymer Science, 1970