Production of High Surface Area Activated Carbon from Peanut Shell by Chemical Activation with Zinc Chloride: Optimisation and Characterization
Open Access
- 3 October 2023
- journal article
- research article
- Published by Springer Nature in BioEnergy Research
- Vol. 17 (1) , 467-478
Abstract
The potential of peanut shell as a precursor to produce activated carbon by chemical activation with ZnCl2, and the effect of activation variables were investigated using response surface methodology. Activation variables examined were temperature, hold time and impregnation ratio; among these, impregnation ratio and temperature were found to most affect the final characteristics of the produced activated carbon. The activation process was mapped, using design of experiments, and the optimum activation conditions were found to be a temperature of 485 °C, with a hold time of 15 min and an impregnation ratio of 1.7. Under the optimised conditions, an activated carbon with a relatively high surface area of ~ 1700 m2/g was produced, at a yield of 47%. Moreover, the carbon exhibited a relatively high density, ranging from 1.455 g/cm3 to 1.750 g/cm3, as well as a low ash content below 1% and a high fixed carbon content above 86%. SEM analysis and FTIR characterisation revealed the heterogenous nature of the produced carbon materials. The developed materials, with potential as adsorbents, removed up to 99.8% of a target dye (methyl orange) depending on their available surface area. Hence, through the insights gained, an optimised carbon is produced, demonstrating the potential to tailor activated carbon materials produced from waste biomass.Keywords
This publication has 44 references indexed in Scilit:
- Activated biochar removes 100 % dibromochloropropane from field well waterEnvironmental Chemistry Letters, 2013
- Effects of activation agents and intrinsic minerals on pore development in activated carbons derived from a Canadian peatMaterials Letters, 2011
- Preparation of activated carbon from sawdust by zinc chloride activationAdsorption, 2010
- Adsorption of malachite green on groundnut shell waste based powdered activated carbonWaste Management, 2007
- Role of chemical activation in the development of carbon porosityColloids and Surfaces A: Physicochemical and Engineering Aspects, 2004
- Application of response surface methodology in describing the performance of coated carbide tools when turning AISI 1045 steelJournal of Materials Processing Technology, 2004
- Activated carbon from almond shells. Chemical activation. 1. Activating reagent selection and variables influenceIndustrial & Engineering Chemistry Product Research and Development, 1984
- Reducing Transformation Bias in Curve FittingThe American Statistician, 1984
- The Determination of Pore Volume and Area Distributions in Porous Substances. I. Computations from Nitrogen IsothermsJournal of the American Chemical Society, 1951
- Adsorption of Gases in Multimolecular LayersJournal of the American Chemical Society, 1938