The mechanical and flame retardant characteristics of lignin-based phenolic foams reinforced with MWCNTs by in-situ polymerization
- 4 March 2020
- journal article
- research article
- Published by Taylor & Francis in Journal of Dispersion Science and Technology
- Vol. 42 (7) , 1042-1051
Abstract
In this study, multi-walled carbon nanotubes (MWCNTs)/lignin-based phenolic foams (L20PFs) composites were prepared by in-situ polymerization. SEM results indicated that MWCNTs act as heterogeneous nucleating agents, which reduces the average size of PFs cells and makes the cells more uniform; MWCNTs are dispersed on the pore walls of the cells and bear a certain load through the interface transfer of the foam to enhance the mechanical properties of the foam. The PFs doped with MWCNTs exhibit enhanced mechanical properties, with compressive and flexural strengths as high as 0.326 MPa and 0.483 MPa, which represent increases of 102.48% and 100.41% over those of pure PF, respectively. The incorporating of MWCNTs significantly improved the limiting oxygen index (LOI) of PFs as much as 44.2%, and decreased heat release rate (HRR), Total heat release (THR), and mass loss rate (MLR). This is due to the MWCNTs composite PFs surface can form dense and incompletely burning black carbon layer during the combustion process, which isolates the external heat and air from the composite material and plays a role of flame retardant. The incorporating of MWCNTs can slightly reduce the thermal conductivity of L20PFs. A table of contents entry A novel MWCNTs/lignin-based phenolic foams composites were fabricated with excellent mechanical, flame retardant and combustion properties.Keywords
Funding Information
- the Fundamental Research Funds for the Central Nonprofit Research Institution of CAF (MA001)
- The National Natural Science Foundation of China
This publication has 45 references indexed in Scilit:
- A review on carbon nanotubes and graphene as fillers in reinforced polymer nanocompositesJournal of Industrial and Engineering Chemistry, 2015
- The mechanical and thermal characteristics of phenolic foams reinforced with carbon nanoparticlesComposites Science and Technology, 2014
- Thermomechanical analyses of phenolic foam reinforced with glass fiber matMaterials & Design (1980-2015), 2013
- Phenolic foams modified by cardanol through bisphenol modificationJournal of Applied Polymer Science, 2013
- Improvement in mechanical and thermal properties of phenolic foam reinforced with multiwalled carbon nanotubesJournal of Applied Polymer Science, 2013
- Synthesis of foaming resol resin modified with oxidatively degraded lignosulfonateIndustrial Crops and Products, 2013
- Phenolic Foam from Oxidatively Degradated LignosulphonateAdvanced Materials Research, 2012
- Tannin-based rigid foams: A survey of chemical and physical propertiesBioresource Technology, 2009
- Tannin-based rigid foams: Characterization and modificationIndustrial Crops and Products, 2009
- Noncovalent Functionalization of Carbon Nanotubes with Sodium Lignosulfonate and Subsequent Quantum Dot DecorationThe Journal of Physical Chemistry C, 2006