The effects of various quenching conditions on both the pre aging at room temperature(R.T.) and subsequent two step aging behavior of an Al Mg Si alloy were investigated mainly by electrical resistivity and hardness measurements. Three types of quenching methods ; i.e. water quenching(W.Q.) , step quenching (S.Q.) and the first pre aging treatment at 373 K were used before the subsequent two step aging treatment. The results were discussed in terms of the role of quenched in excess vacancies in the early stage of precipitation (i.e. Si rich clusters and GP zones). The results clearly indicate that the quenched in excess vacancies are trapped inside GP zones during the first pre aging at 373 K. This effect suppresses the Si rich cluster formation in the second pre aging at R.T. and resultantly the negative effect in the final aging at 453 K. It is, therefore, important to control the heat treatment sequence for Al Mg Si alloys so that the quenched in excess vacancies are more associated with the GP zones, the effective nucleation sites for the b″ phase, before the formation of the Si rich clusters which are non effective nucleation sites for the b″ phase.