Biodegradable eco-friendly drilling fluid: a study on the use of peanut shell with different particle sizes as sustainable additives
Open Access
- 6 May 2025
- journal article
- research article
- Published by Springer Nature in Chemical Papers
- Vol. 79 (7) , 4213-4228
Abstract
Meeting the global energy demand and sustainable development of conventional petroleum reserves necessitates the development of high-performance and environmentally friendly water-based drilling fluids (WBDF). Nevertheless, one of the major concerns of using WBDF is the fluid loss due to its penetration into the formation during the drilling operation. Various additives (fluid-loss agents) in the industry have been introduced to tackle the issue but at the cost of non-biodegradable hazardous chemicals. Due to the recent interest in environmentally friendly WBDF additives, this study looked at the suitability of the composite part of peanut shell powder (CSP). The CSP was selected because of affordability, accessibility and fibrous content. Following the American Petroleum Institute (API) guidelines for preparing the drilling mud additives, six different laboratory experiments were carried out for biodegradable drilling fluids prepared from CSP at different concentrations of 1, 2 and 3 wt% and particle sizes (fine, 224 μm and medium, 1.12 mm). Major elemental and temperature analyses of the samples were conducted using Energy-dispersive X-ray Spectroscopy (EDX), Fourier Transform Infrared spectroscopy (FTIR) and a Thermogravimetric Analyser (TGA). Comparing the results with the referenced WBDF indicates that adding 1, 2 and 3 wt % fine CSP decreases the fluid loss by 37%, 50% and 65%, respectively. In addition, using medium-size CSP in the same concentration of 1, 2 and 3 wt % reduced the fluid loss by 30%, 39% and 53%, respectively. Based on the results, the use of fine particle size CSP with a 3 wt % weight concentration is recommended, as it creates a thin mud cake with lower permeability, allowing for better control of fluid loss.Keywords
Funding Information
- Palacký University Olomouc
This publication has 36 references indexed in Scilit:
- Application of ultra-fine particles of potato as eco-friendly green additives for drilling a borehole: A filtration, rheological and morphological evaluationChemical Engineering Research and Design, 2024
- Feasibility study of biodegradable coffee ground waste and watermelon rind as water-based drilling fluid additivesGas Science and Engineering, 2024
- Evaluation the effect of wheat nano-biopolymers on the rheological and filtration properties of the drilling fluid: Towards sustainable drilling processColloids and Surfaces A: Physicochemical and Engineering Aspects, 2023
- Implementation of Amorphous Mesoporous Silica Nanoparticles to formulate a novel water-based drilling fluidArabian Journal of Chemistry, 2023
- Sustainable aspects behind nano-biodegradable drilling fluids: A critical reviewGeoenergy Science and Engineering, 2023
- Rheo-microscopy in situ synchronous measurement of shearing thinning behaviors of waxy crude oilFuel, 2022
- A natural dye in water-based drilling fluids: Swelling inhibitive characteristic and side effectsPetroleum, 2017
- Investigation of pressure drop in horizontal pipes with different diametersInternational Journal of Multiphase Flow, 2017
- Environment friendly fluid loss additives to protect the marine environment from the detrimental effect of mud additivesJournal of Petroleum Science and Engineering, 2005
- Chemical composition and in‐vitro digestibility of thermochemically treated peanut hullsJournal of the Science of Food and Agriculture, 1986