Measurement and modelling of migration from paper and board into foodstuffs and dry food simulants
Authors:
- 30 June 2010
- journal article
- research article
- Published by Taylor & Francis in Food Additives & Contaminants: Part A
- Vol. 27 (9) , 1306-1324
Abstract
This study carried out migration investigations with different spiked and non-spiked paper and board packaging materials in contact with foodstuffs and food simulants in the temperature range between −18°C and 40°C. The aim was to deepen the understanding of the migration behaviour of target substances in paper and board fibres. Components and contaminants of paper and board with different molecular weight and chemical structure were selected as target migrants. From the kinetic migration studies, diffusion and partition coefficients were derived by using software for modelling migration in multilayer materials. On the basis of these results, for the first time a model for the migration from paper and board into foods and simulants was developed by adapting the validated diffusion model for plastics. In contrast to the migration in plastic materials, where the migrants are solved and homogeneously distributed in the polymer matrix, mass transfer in paper and board is a more complex phenomenon, because the migrants can be adsorbed on the cellulose surface with different strength. The most important finding of the study was that for a correct modelling of the experimental results in many cases paper and board must be regarded as a two-layer system: the main mass of paper and board (B1) defines the core layer with high diffusion rates, and a thin second layer (B2) represents the surface region of the paper and board with decreased diffusion rates due to the slow desorption.Keywords
This publication has 21 references indexed in Scilit:
- Migration of fluorochemical paper additives from food-contact paper into foods and food simulantsFood Additives & Contaminants: Part A, 2008
- Migration of Plastic Constituents2008
- Introduction2006
- Evaluation of migration models that might be used in support of regulations for food-contact plasticsFood Additives & Contaminants, 2005
- Benzophenone in cartonboard packaging materials and the factors that influence its migration into foodFood Additives & Contaminants, 2003
- Diffusion of volatile compounds in fibre networks: experiments and modelling by random walk simulationFood Additives & Contaminants, 2002
- Migration of alkylbenzenes from packaging into food and Tenax®Packaging Technology and Science, 2001
- Phthalates in paper and board packaging and their migration into Tenax and sugarFood Additives & Contaminants, 1999
- Potential migration of Diisopropyl naphthalenes from recycled paperboard packaging into dry foodsFood Additives & Contaminants, 1999
- Migration studies from paper and board food packaging materials. 1. Compositional analysisFood Additives & Contaminants, 1997