Influence of dopants in the buffer layer on CZTS solar cell performance
Authors:
- 1 December 2022
- journal article
- research article
- Published by Emerald Publishing in Emerging Materials Research
- Vol. 11 (4) , 478-485
Abstract
Copper zinc tin sulfide (CZTS) has commanded the next generation of solar cell materials because of its superior performance, lower cost and abundant availability on earth. This study examined the impact of different dopants in the buffer layer on the electrical characteristics of solar cells. For the n-indium tin oxide/cadmium sulfide (CdS) (silver (Ag)–cadmium sulfide, copper (Cu)–cadmium sulfide and chlorine (Cl)–cadmium sulfide)/CZTS/molybdenum (Mo) proposed device structure of a solar cell, the doping concentration and thickness of the buffer and absorber layers were examined. The silver–cadmium sulfide buffer layer was shown to be one of the best options for manufacturing a buffer layer for a CZTS-based solar cell in this study. The doping concentration and thickness of the solar cell were optimized in this work. This work obtained a higher than 21% efficiency when using silver–cadmium sulfide as a dopant in the cadmium sulfide buffer layer. Numerical modeling of the proposed structure revealed a unique method for improving the efficiency of a CZTS solar cell. The findings of this study are expected to be utilized in the interest of the many researchers working in this field.Keywords
This publication has 12 references indexed in Scilit:
- A simple structure of Cu2ZnSnS4/CdS solar cells prepared by sputteringPhysica B: Condensed Matter, 2017
- Cadmium free high efficiency Cu 2 ZnSn(S,Se) 4 solar cell with Zn 1− x Sn x O y buffer layerAlexandria Engineering Journal, 2017
- Strategic review of interface carrier recombination in earth abundant Cu–Zn–Sn–S–Se solar cells: current challenges and future prospectsJournal of Materials Chemistry A, 2017
- Emerging Photovoltaics: Organic, Copper Zinc Tin Sulphide, and Perovskite-Based Solar CellsJournal of Applied Chemistry, 2016
- Optoelectronic and material properties of nanocrystal-based CZTSe absorbers with Ag-alloyingSolar Energy Materials and Solar Cells, 2016
- Characterization of a CZTS thin film solar cell grown by sputtering methodSolar Energy, 2014
- Device Characteristics of CZTSSe Thin‐Film Solar Cells with 12.6% EfficiencyAdvanced Energy Materials, 2013
- The path towards a high-performance solution-processed kesterite solar cellSolar Energy Materials and Solar Cells, 2011
- Localized-Surface-Plasmon Enhanced the 357 nm Forward Emission from ZnMgO Films Capped by Pt NanoparticlesDiscover Nano, 2009
- Electrical characterization of Au/n-ZnO Schottky contacts on n-SiJournal of Alloys and Compounds, 2009