Study on the properties of magnetorheological gel based on polyurethane
Authors:
- 3 September 2010
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 118 (5) , 2765-2771
Abstract
Magnetorheological gels (MRGs) known as a new kind of magnetorheological material are composite gels containing magnetic particles suspended in polymer gels. In this study, a category of MR polymer gels based on polyurethane (PU) were prepared. The microstructures of these MRGs were observed with a digital microscope. Their rheological properties under both steady shear and oscillation testing were characterized by using a MR rheometer. The viscosity of the PU MRG decreased with the increment of NCO/OH ratio and increased with the increment of the weight concentration of carbonyl iron particles, molecular mass of poly propylene glycol, and applied magnetic field. The storage modulus increased gradually with the increment of applied magnetic field and weight concentration of carbonyl iron particles. The PU MRG exhibits high static shear yield stress (60.8 kPa, at 573 mT) and dynamic shear yield stress (83.9 kPa, at 573 mT) and wide variation range (static shear yield stress: 6–62 kPa, dynamic shear yield stress: 15–85 kPa). These advantages indicate that PU MRG is able to satisfy wide applications. In addition, both static and dynamic shear yield stresses of the MRG samples increase with the increment of molar mass of polypropylene glycol. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010Keywords
This publication has 22 references indexed in Scilit:
- Optimal control of structural vibrations using a mixed-mode magnetorheological fluid mountInternational Journal of Mechanical Sciences, 2008
- Magnetorheological Isolators Using Multiple Fluid ModesJournal of Intelligent Material Systems and Structures, 2007
- Geometry optimization of MR valves constrained in a specific volume using the finite element methodSmart Materials and Structures, 2007
- Inelastic properties of magnetorheological composites: I. Fabrication, experimental tests, cyclic shear propertiesSmart Materials and Structures, 2007
- Development of an MR-brake-based haptic deviceSmart Materials and Structures, 2006
- Supramolecular magnetorheological polymer gelsJournal of Applied Polymer Science, 2006
- Synthesis and characterization of magnetorheological polyimide gelsJournal of Applied Polymer Science, 2005
- Magnetorheological fluids based haptic deviceSensor Review, 2004
- Development and characterization of hydrocarbon polyol polyurethane and silicone magnetorheological polymeric gelsJournal of Applied Polymer Science, 2004
- Development and characterization of magnetorheological polymer gelsJournal of Applied Polymer Science, 2002