Modulus−suction−moisture relationship for compacted soils
Authors:
- 1 July 2008
- journal article
- Published by Canadian Science Publishing in Canadian Geotechnical Journal
- Vol. 45 (7) , 973-983
Abstract
The ultimate parameter of interest in engineering design of compacted subgrades and support fills for highways, railroads, airfields, parking lots, and mat foundations is often the soil modulus. Modulus of compacted soils depends not only on dry unit weight and moisture but also on matric suction and soil structure (or fabric) resulting from the compaction process. However, these relationships in the as-compacted state (i.e., immediately after compaction) have not yet been extensively explored. This paper presents an experimental laboratory study of the shear modulus – matric suction – moisture content-dry unit weight relationship using three compacted subgrade soils. Compacted subgrade specimens were prepared over a range of molding water contents from dry to wet of optimum using enhanced, standard, and reduced Proctor efforts. A nondestructive elastic wave propagation technique, known as bender elements, was used to assess the shear wave velocity and corresponding small-strain shear modulus (Go) of the compacted subgrade specimens. The matric suctions were measured with the filter paper method. An empirical relation that takes into account the effect of compaction conditions is proposed for the Go– matric suction – molding water content relationship of compacted subgrade soils.Keywords
This publication has 27 references indexed in Scilit:
- BCD: A Soil Modulus Device for Compaction ControlJournal of Geotechnical and Geoenvironmental Engineering, 2006
- Effect of Moisture Content and Pore Water Pressure Buildup on Resilient Modulus of Cohesive Soils in Ohio2003
- Calibration and Temperature Correction of Heat Dissipation Matric Potential SensorsSoil Science Society of America Journal, 2002
- Alternative Method of Determining Resilient Modulus of Compacted Subgrade Soils Using Free-Free Resonant Column TestTransportation Research Record: Journal of the Transportation Research Board, 1997
- Objective criteria for determining Gmax from bender element testsGéotechnique, 1996
- Laboratory Filter Paper Suction MeasurementsGeotechnical Testing Journal, 1994
- Soil Mechanics for Unsaturated Soils1993
- A LOW-COST METHOD OF ASSESSING CLAY DESICCATION FOR LOW-RISE BUILDINGS.Civil Engineering, 1992
- Filter-paper method for routine measurement of field water potentialJournal of Hydrology, 1981
- Mechanical Behavior and Testing Methods of Unsaturated Soils1981