Sources and Destinations of Oil Leakage through TPOCR Based on 2D-LIF Observation and Modeling Analysis
Authors:
Open Access
- 9 December 2023
- journal article
- research article
- Published by MDPI AG in Lubricants
- Vol. 11 (12) , 522
Abstract
The Three-Piece Oil Control Ring (TPOCR) is becoming a viable option for heavy duty gas and hydrogen engines due to the low particle concentration in these engines. Although direct oil leakage from the gap is not likely to happen with the misalignment of the upper and lower rail gaps, there exist other less-apparent oil leaking mechanisms through the TPOCR. This work is targeted at understanding the oil leakage’s source and destination through the rail and liner interfaces across the whole cycle. The 2D Laser Induced Fluorescence technique was applied on an optical engine to study the oil transport behavior. Combined with a TPOCR model for dynamics and lubrication, the mechanisms that cause rail twist and oil scraping by the upper rail were analyzed. It was found that the symmetrical rail can scrape the oil up in the up-strokes. The scraped oil first accumulates in the clearance between the upper rail and groove, as well as at the upper corner of the rail Outer Diameter before being transferred to both the third land and liner when the piston changes direction at Top Dead Center. Rails with an asymmetrical profile can reduce or enhance these effects depending the orientation of the rails. This study provides findings that could help design the engine to better control Lubricate Oil Consumption and properly lubricate the Top Dead Center’s dry region at the same time.Keywords
Funding Information
- Mercedes-Benz
This publication has 14 references indexed in Scilit:
- A Synthetic Ash-Loading Method for Gasoline Particulate Filters with Active Oil InjectionSAE International Journal of Engines, 2021
- An assessment of gas power leakage and frictional losses from the top compression ring of internal combustion enginesTribology International, 2020
- Effect of Lubricant Oil on Particle Emissions from a Gasoline Direct Injection Light-Duty VehicleSAE International Journal of Advances and Current Practices in Mobility, 2018
- Lubricant Reactivity Effects on Gasoline Spark Ignition Engine KnockSAE International Journal of Fuels and Lubricants, 2012
- A Study on the Mechanism of Engine Oil Consumption- Oil Upwards Transport via Piston Oil Ring Gap -SAE International Journal of Advances and Current Practices in Mobility, 2011
- Piston Ring Tribological Challenges on the Next Generation of Flex-fuel EnginesSAE International Journal of Engines, 2010
- Visualization of auto-ignition and pressure wave during knocking in a hydrogen spark-ignition engineInternational Journal of Hydrogen Energy, 2009
- Real-Time Transient and Steady-State Measurement of Oil Consumption for Several Production SI-EnginesSAE International Journal of Advances and Current Practices in Mobility, 2001
- Review of Power Cylinder Friction for Diesel EnginesJournal of Engineering for Gas Turbines and Power, 2000
- Modeling the Dynamics and Lubrication of Three Piece Oil Control Rings in Internal Combustion EnginesSAE International Journal of Advances and Current Practices in Mobility, 1998