Fatigue properties of combined friction stir and adhesively bonded AA6082‐T6 overlap joints
- 8 July 2020
- journal article
- research article
- Published by Wiley in Fatigue & Fracture of Engineering Materials & Structures
- Vol. 43 (9) , 2169-2180
Abstract
Even though friction stir welding (FSW) has been shown to produce high performing butt joints, stress concentration at the weld edges in overlap FSW significantly reduces the performance of these joints. By combining FSW and adhesive bonding into a friction stir (FS) weld bonding, joint mechanical performance is greatly improved. Quasistatic and fatigue strength of the proposed FS weld‐bonding joints was assessed and benchmarked against overlap FSW and adhesive bonding. The characterization of the structural adhesive is also presented, including differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA), as well as mechanical characterization with curing temperature. A small process parameter study was made to select proper FSW parameters for AA6082‐T6 overlap FSW and FS weld‐bonded joints. FS weld bonding achieved a significant increase in quasistatic and fatigue strength when compared with overlap FSW, with 79.9% of the fatigue strength of adhesive‐bonded joints at 106 cycles, whereas FSW had 41.6%.Keywords
Funding Information
- Fundação para a Ciência e a Tecnologia (PTDC/EME‐EME/29340/2017, UIDB/50022/2020)
This publication has 22 references indexed in Scilit:
- Gap tolerance allowance and robotic operational window for friction stir butt welding of AA6061Journal of Materials Processing Technology, 2013
- Mechanical behaviour of AA 2024 friction stir overlap weldsInternational Journal of Structural Integrity, 2013
- Lap shear strength and fatigue behavior of friction stir spot welded dissimilar magnesium-to-aluminum joints with adhesiveMaterials Science and Engineering: A, 2013
- Influence of the FSW clamping force on the final distortion and residual stress fieldMaterials Science and Engineering: A, 2012
- Effect of Compliance and Travel Angle on Friction Stir Welding With GapsJournal of Manufacturing Science and Engineering, 2010
- Pure mode II fracture characterization of composite bonded jointsInternational Journal of Solids and Structures, 2009
- Fatigue Behaviour of FS, LB and MIG Welds of AA6061-T6 and AA6082-T62008
- Fatigue behaviour of Al2024-T3 friction stir welded lap jointsEngineering Fracture Mechanics, 2007
- Fatigue properties of friction stir overlap weldsInternational Journal of Fatigue, 2007
- Equivalent crack based mode II fracture characterization of woodEngineering Fracture Mechanics, 2006