Rib Spalling 3D Model for Soft Coal Seam Faces with Large Mining Height in Protective Seam Mining: Theoretical and Numerical Analyses
Open Access
Abstract
Fully-mechanized mining of coal face with a large cutting height is generally jeopardized by rib spalling disaster in the working face. Preventive measures based on undisturbed coal seam conditions fail to provide safe predictions, as large-scale fractures in soft coal face frequently appear before excavation due to mining-induced stresses. This paper investigates a case study of the Paner Mine 11224 working face in the Huainan mine area, China, which features an overlying protected layer in the protective seam mining. To simulate the failure process in such a mine, we elaborated a simplified physical-mechanical model of a coal wall that underwent shear failure and sliding instability, in compliance with the triangular prism unit criterion. Similar simulation experiments, theoretical calculations, and borehole monitoring were used to comprehensively analyze the overburden fracture and movement after mining the lower protective seam. The development height of three overburden zones was determined, and the characteristics of the protected layer affected by mining were obtained. The results show that the failure is mainly related to the roof load, coal cohesion, internal friction angle, coal seam inclination, and sidewall protecting force. The key to limiting the frictional sliding of a slip body is to reduce the roof load and increase the sliding coefficient and cohesion of the main control weak surface (MCWS). Besides, a self-developed three-dimensional numerical calculation software RFPA3D (Realistic Fracture Process 3D Analysis), which considered the rock heterogeneity, was used to reproduce a weak triangular prism’s progressive failure process. The numerical simulation results agreed with the fracture pattern predicted by the theoretical model, which accurately described the rib spalling mechanisms in a soft coal face with a large cutting height and a protective layer.Keywords
Funding Information
- Open Fund of State Key Laboratory of Water Resource Protection and Utilization in Coal mining (GJNY-18-73.7, QN2018108, 1908085QE183, 51904011, 19KZS203, 51634007)
- Anhui University Scientific Research Foundation (GJNY-18-73.7, QN2018108, 1908085QE183, 51904011, 19KZS203, 51634007)
- Natural Science Foundation of Anhui Province (GJNY-18-73.7, QN2018108, 1908085QE183, 51904011, 19KZS203, 51634007)
- National Youth Science Foundation (GJNY-18-73.7, QN2018108, 1908085QE183, 51904011, 19KZS203, 51634007)
- Institute of Energy, Hefei Comprehensive National Science Center (GJNY-18-73.7, QN2018108, 1908085QE183, 51904011, 19KZS203, 51634007)
- National Natural Science Foundation of China (GJNY-18-73.7, QN2018108, 1908085QE183, 51904011, 19KZS203, 51634007)
This publication has 31 references indexed in Scilit:
- Three-zone characterisation of coupled strata and gas behaviour in multi-seam miningInternational Journal of Rock Mechanics and Mining Sciences, 2015
- Cavability control by hydraulic fracturing for top coal caving in hard thick coal seamsInternational Journal of Rock Mechanics and Mining Sciences, 2015
- Bulking factor of the strata overlying the gob and a three-dimensional numerical simulation of the air leakage flow fieldMining Science and Technology (China), 2011
- Stress analysis of longwall top coal cavingInternational Journal of Rock Mechanics and Mining Sciences, 2010
- A theoretical analysis of FGM thin plates based on physical neutral surfaceComputational Materials Science, 2008
- Determination of the effect of roof pressure on coal hardness and excavation productivity: an example from a Çayırhan lignite mine, Ankara, Central TurkeyInternational Journal of Coal Geology, 2008
- A numerical study of the influence of heterogeneity on the strength characterization of rock under uniaxial tensionMechanics of Materials, 2007
- Numerical studies of the influence of microstructure on rock failure in uniaxial compression — Part II: constraint, slenderness and size effectInternational Journal of Rock Mechanics and Mining Sciences, 2000
- Numerical studies of the influence of microstructure on rock failure in uniaxial compression — Part I: effect of heterogeneityInternational Journal of Rock Mechanics and Mining Sciences, 2000
- A new approach to numerical method of modelling geological processes and rock engineering problems — continuum to discontinuum and linearity to nonlinearityEngineering Geology, 1998