Optimization of Fusing Process Conditions Using the Taguchi Method
Authors:
- 28 January 2010
- journal article
- other
- Published by SAGE Publications in Textile Research Journal
- Vol. 80 (11) , 1016-1026
Abstract
In this study we have developed a process for optimizing fusing conditions to maximize the bonding strength between a fabric and a fusible interlining before-and-after drying process using the Taguchi method. Four parameters, including types of fusible interlining, fusing temperature, fusing pressure, and fusing time, which are regarded as the most important factors from previous studies, were optionally selected to optimize the quality of fused composites. The Taguchi processes has the following steps: (1) calculate the signal-to-noise (SN) ratios of repeated experimental observations; (2) find the corresponding conditions that influence fusing for a given fabric; (3) determine the optimum values of the fusing conditions; (4) calculate the prediction interval of maximum bonding strength of the fused composite with optimum fusing conditions; (5) certify the Taguchi processes that apply; and finally, (6) compare the expectation losses before and after improving bonding strength of the fused composite. The process was applied to 11 different 100% wool and wool/ polyester-blended fabrics with the specified experimental design using an optimum orthogonal array table. Conclusively, with the Taguchi processes applied in this study, we can easily determine the optimum fusing conditions for the maximization of bonding strength without any defects of fused composites with simple experiments.Keywords
This publication has 3 references indexed in Scilit:
- Compatibility of Outer and Fusible Interlining Fabrics in Tailored Garments Part I: Desirable Range of Mechanical Properties of Fused CompositesTextile Research Journal, 1997
- A New Concept in Garment ManufactureInternational Journal of Clothing Science and Technology, 1992
- Tailoring Process ControlThe Journal of the Textile Institute, 1992