Deformation Heating and Temperature Changes in a Near-β Titanium Alloy during β-Processed Forging
Open Access
- 15 April 2022
- journal article
- research article
- Published by MDPI AG in Journal of Manufacturing and Materials Processing
- Vol. 6 (2) , 47
Abstract
We investigated the temperature increase caused by heat generation from plastic deformation during β-processed forging in a near-β titanium alloy, Ti-17 alloy (Ti-5Al-2Sn-2Zr-4Cr-4Mo, wt%), by inserting thermocouples into large workpieces (100 mm in diameter and 50 mm in height). The workpiece was initially heated and held at 1193 K (920 °C) in the single-β region. It was subsequently forged between hot dies in surrounding heaters at a compression percentage of 75% at strain rates of 0.05 and 0.5 s−1 at 1023–1123 K in the (α + β) region. At 0.05 s−1, the temperature logarithmically increased by 39 K in 28 s for 1023 K; it increased by 30 K in 28 s for 1073 K. However, at 0.5 s−1, the material temperature increased, in 3 s, beyond or close to the β-transus temperature during forging at 1023 and 1073 K. In addition, as the forging temperature decreased, the increase in material temperature moderated, resulting in a difference of 27 K in the last forging stage, between the conditions of 1023 and 1073 K. This would reduce the temperature difference effect on microstructure formation during β-processed forging.Keywords
Funding Information
- Council for Science, Technology, and Innovation (The Cross-Ministerial Strategic Innovation Promotion Program, and the Process Innovation for Super Heat-Resistant Metal)
This publication has 26 references indexed in Scilit:
- Characterization of hot deformation microstructure of a near beta titanium alloy Ti-5553Journal of Alloys and Compounds, 2014
- Strain-induced phase transformation during thermo-mechanical processing of titanium alloysMaterials Science and Engineering: A, 2012
- Influence of prior deformation rate on the mechanism of β→α+β transformation in Ti–6Al–4VScripta Materialia, 2002
- Thermo-mechanical processing of high strength β-titanium alloys and effects on microstructure and propertiesJournal of Materials Processing Technology, 2001
- Thermomechanical processing of alpha titanium alloys—an overviewMaterials Science and Engineering: A, 1999
- Influence of processing on microstructure and mechanical properties of (α+β) titanium alloysMaterials Science and Engineering: A, 1998
- Effect of internal heating during hot compression on the stress-strain behavior of alloy 304LMetallurgical and Materials Transactions A, 1994
- Prediction of steel flow stresses at high temperatures and strain ratesMetallurgical Transactions A, 1991
- Characterization and modeling of the high temperature flow behavior of aluminum alloy 2024Metallurgical Transactions A, 1986
- Isothermal forging of titanium alloysMetal Science and Heat Treatment, 1980