Characterization of experimental composite biomaterials
- 1 January 1996
- journal article
- research article
- Published by Wiley in Journal of Biomedical Materials Research
- Vol. 33 (2) , 89-100
Abstract
A comparison was made among the elastic moduli of various combinations of dimethacrylates that may be used as matrix resins in dental restorative composite biomaterials systems. Two ceramic filler materials with contrasting shape and size were synthesized by wet chemistry; these were used to produce a range of experimental composite systems. Dynamic elastic moduli determinations were used to study the influence of filler volume, filler size/shape, use of silane coupling agents, and storage in water. The filler was varied from 0 to 59% by volume for filler A and from 0 to 48% volume for filler B. Silane treatment was found to have a significant effect on modulus. Moduli for composite materials containing silane-treated filler were higher compared to materials containing the same volume loading of non-silane-treated filler. Using a light curing resin as a matrix gave a significantly higher modulus for a filler loading of 38% by volume. Storage in water for 29 days was found to have only a slight effect on moduli for composite systems containing in excess of 20% by volume of filler. The experimental composite systems produced slightly higher values for moduli than were predicted by the theoretical Reuss constant stress model. © 1996 John Wiley & Sons, Inc.Keywords
This publication has 23 references indexed in Scilit:
- The effect of storage media upon the surface microhardness and abrasion resistance of three compositesDental Materials, 1990
- The glass transition of Cu78Ni6P7Sn9 amorphous alloy ribbonJournal of Materials Science Letters, 1989
- Effect of Monomer Structure on the Mechanical Properties of Light-cured Composite ResinsDental Materials Journal, 1989
- Frequency dependency of Young's modulus of dental cocompositesJournal of Materials Science, 1987
- Combining rules for predicting the thermoelastic properties of particulate filled polymers, polymers, polyblends, and foamsPolymer Composites, 1981
- Solutions for effective shear properties in three phase sphere and cylinder modelsJournal of the Mechanics and Physics of Solids, 1979
- Elastic Properties of Dental Resin Restorative MaterialsJournal of Dental Research, 1974
- Micromechanics Analysis of Porous and Filled Ceramic CompositesJournal of the American Ceramic Society, 1971
- Elastic properties of reinforced solids: Some theoretical principlesJournal of the Mechanics and Physics of Solids, 1963
- The Elastic Moduli of Heterogeneous MaterialsJournal of Applied Mechanics, 1962