A novel design method of concurrent dual-band power amplifiers including impedance tuning at inter-band modulation frequencies
Authors:
- 1 June 2013
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Abstract
A novel design method of concurrent dual-band power amplifiers (PAs) including impedance tuning at inter-band modulation (IM) frequencies is proposed in this paper. It's shown that the impedances exhibited to the transistor at IM frequencies can affect the performance of a concurrent PA significantly. Thus it is very essential to take IM impedances into account, which can be referred to as IM impedance manipulation, or IM tuning for short. An example concurrent dual-band 1.92.6GHz PA is designed using the proposed method and a conventional concurrent dual-band PA not considering IM tuning is also designed for the purpose of comparison. Designed with a 10-Watts GaN HEMT, the proposed PA exhibits about 11 Watts output power and higher than 72.8% drain efficiency when driven equally by concurrent CW stimulus. To our best knowledge, this is the state-of-the-art performance of concurrent dual-band PA, and it's the first reported concurrent PA with IM tuning.Keywords
This publication has 4 references indexed in Scilit:
- Design of a Concurrent Dual-Band 1.8–2.4-GHz GaN-HEMT Doherty Power AmplifierIEEE Transactions on Microwave Theory and Techniques, 2012
- Design and Linearization of Concurrent Dual-Band Doherty Power Amplifier With Frequency-Dependent Power RangesIEEE Transactions on Microwave Theory and Techniques, 2011
- Concurrent multi-band power amplifier employing multi-section impedance transformer2011
- Concurrent Dual-Band Class-F Load Coupling Network for Applications at 1.7 and 2.14 GHzIEEE Transactions on Circuits and Systems II: Express Briefs, 2008