Blowout Limits of Cavity-Stabilized Flame of Supercritical Kerosene in Supersonic Combustors
Authors:
- 1 September 2014
- journal article
- research article
- Published by American Institute of Aeronautics and Astronautics (AIAA) in Journal of Propulsion and Power
- Vol. 30 (5) , 1161-1166
Abstract
Blowout limits of cavity-stabilized flame of supercritical kerosene were experimentally studied by using Mach 2.5 and 3.0 direct-connect supersonic model combustors operated under various air and fuel conditions. Specifically, the effects of the stagnation temperature and the stagnation pressure on the blowout limits were investigated for supercritical kerosene injected from the wall upstream of a cavity flameholder in a Mach 2.5 combustor. Experiments were performed under the same conditions for supercritical kerosene injected from the rear part of the cavity bottom to study the influence of the location of fuel injection. The blowout limits of supercritical kerosene injected from the wall upstream of the cavity were further investigated in a Mach 3.0 combustor. Besides the effects of the stagnation temperature and stagnation pressure, the effect of the divergence angle of the combustor on the lean-fuel blowout limit was studied. Results show that there exist two blowout limits corresponding to the lean-...Keywords
This publication has 21 references indexed in Scilit:
- Thermal Cracking and Heat Sink Capacity of Aviation Kerosene Under Supercritical ConditionsJournal of Thermophysics and Heat Transfer, 2011
- Investigation of Vaporized Kerosene Injection and Combustion in a Supersonic Model CombustorJournal of Propulsion and Power, 2006
- Characteristics of Cavity-Stabilized Flames in a Supersonic FlowJournal of Propulsion and Power, 2005
- Mixing and Combustion Studies Using Cavity-Based Flameholders in a Supersonic FlowJournal of Propulsion and Power, 2004
- Investigation of Vaporized Kerosene Injection in a Supersonic Model Combustor2003
- Liquid Fuels and Propellants for Aerospace Propulsion: 1903-2003Journal of Propulsion and Power, 2003
- Cavity Flame-Holders for Ignition and Flame Stabilization in Scramjets: An OverviewJournal of Propulsion and Power, 2001
- Fundamental Studies of Cavity-Based Flameholder Concepts for Supersonic CombustorsJournal of Propulsion and Power, 2001
- Future directions of supersonic combustion research - Air Force/NASA workshop on supersonic combustion1997
- Modeling studies of baffle-type combustorsSymposium (International) on Combustion, 1963