Solar Salt Latent Heat Thermal Storage for a Small Solar Organic Rankine Cycle Plant
Open Access
- 6 September 2019
- journal article
- research article
- Published by Wiley in Journal of Energy Resources Technology
- Vol. 142 (3)
Abstract
The design of the latent heat thermal storage system (LHTESS) was developed with a thermal capacity of about 100 kW h as a part of small solar plant based on the organic Rankine cycle (ORC). The phase change material (PCM) used is solar salt with the melting/solidification temperature of about 220 °C. Thermophysical properties of the PCM were measured, including its phase transition temperature, heat of fusion, specific heat, and thermal conductivity. The design of the thermal storage was finalized by means of the 3D computational fluid dynamics analysis. The thermal storage system is modular, and the thermal energy is delivered with the use of thermal oil, heated by Fresnel mirrors. The heat is transferred into and from the PCM in the casing using bidirectional heat pipes, filled with water. A set of metallic screens are installed in the box with the pitch of 8–10 mm to enhance the heat transfer from heat pipes to the PCM and vice-versa during the charging and discharging processes, which take about 4 h. This work presents a numerical study on the use of metallic fins without thermal bonding as a heat transfer enhancement method for the solar salt LHTESS. The results show that the absence of the thermal bonding between fins and heat pipes (there was a gap of 0.5 mm between them) did not result in a significant reduction of charging or discharging periods. As expected, aluminum fins provide better performance in comparison with steel ones due to the difference in the material conductivity. The main advantage observed for the case of using aluminum fins was the lower temperature gradient across the LHTESS.Keywords
Funding Information
- Horizon 2020 (723596)
- H2020 Marie Skłodowska-Curie Actions (705944)
This publication has 21 references indexed in Scilit:
- Numerical study of finned heat pipe-assisted thermal energy storage system with high temperature phase change materialEnergy Conversion and Management, 2015
- Stability of sugar alcohols as PCM for thermal energy storageSolar Energy Materials and Solar Cells, 2014
- Material aspects of Solar Salt for sensible heat storageApplied Energy, 2013
- Thermal and mechanical properties of nitrate thermal storage salts in the solid-phaseSolar Energy, 2012
- High-temperature phase change materials for thermal energy storageRenewable and Sustainable Energy Reviews, 2010
- Numerical simulation and parametric study on new type of high temperature latent heat thermal energy storage systemEnergy Conversion and Management, 2008
- Solid/Liquid Phase Change in Presence of Natural Convection: A Thermal Energy Storage Case StudyJournal of Energy Resources Technology, 2003
- Optimum Efficiencies and Phase Change Temperatures in Latent Heat Storage SystemsJournal of Energy Resources Technology, 1994
- Phase Change Heat Transfer During Melting and Resolidification of Melt Around Cylindrical Heat Source(s)/Sink(s)Journal of Energy Resources Technology, 1989
- CXXIV.—Viscosity determinations at high temperaturesJournal of the Chemical Society, Transactions, 1908