Preliminary Development of a Novel Resorbable Synthetic Polymer Fiber Scaffold for Anterior Cruciate Ligament Reconstruction
Authors:
- Joachim KohnJKJoachim Kohn
- Michael G. DunnMDMichael G. Dunn
- 1 January 2004
- journal article
- research article
- Published by SAGE Publications in Tissue Engineering
- Vol. 10 (1-2) , 43-52
Abstract
We are developing novel resorbable fiber-based scaffolds for reconstruction of the anterior cruciate ligament (ACL). For the first time, we report fabrication of fibers from poly(DTE carbonate) polymer. Poly(L-lactic acid) fibers were also fabricated for comparison purposes. The study was performed in three phases. In phase I, first-generation fibers were found to promote tissue ingrowth in a subcutaneous model. In phase II, second-generation fibers were fabricated from poly(DTE carbonate) and poly(L-lactic acid), with diameters of 79 and 72 μm, ultimate tensile strengths of 230 and 299 MPa, moduli of 3.1 and 4.9 GPa, and molecular weights of 65,000 and 170,000, respectively. These fibers were evaluated on the basis of molecular weight retention, strength retention, and cytocompatibility. After 30 weeks of incubation in phosphate-buffered saline, poly(DTE carbonate) and poly(L-lactic acid) fibers had 87 and 7% strength retention, respectively. Similar trends were observed for molecular weight loss. Fibroblasts attached and proliferated equally well on both scaffold types in vitro. Finally, in phase III, a prototype ACL reconstruction device was fabricated from poly(DTE carbonate) fibers with strength values comparable to those of the normal ACL (57 MPa). Collectively, these data suggest that poly(DTE carbonate) fibers are potentially useful for development of resorbable scaffolds for ACL reconstruction.Keywords
This publication has 12 references indexed in Scilit:
- Functional Tissue Engineering: The Role of BiomechanicsJournal of Biomechanical Engineering, 2000
- Comparative histological evaluation of new tyrosine-derived polymers and poly (L-lactic acid) as a function of polymer degradationJournal of Biomedical Materials Research, 1998
- High speed melt spinning of poly(L-lactic acid) filamentsJournal of Polymer Science Part B: Polymer Physics, 1998
- Comparison of the effect of ethylene oxide and ?-irradiation on selected tyrosine-derived polycarbonates and poly(L-lactic acid)Journal of Applied Polymer Science, 1997
- Biodegradable fibres of poly(l-lactic acid) produced by melt spinningPolymer, 1997
- Canine bone response to tyrosine-derived polycarbonates and poly(L-lactic acid)Journal of Biomedical Materials Research, 1996
- Preparation and properties of absorbable fibres from l-lactide copolymersPolymer, 1993
- Anterior cruciate ligament reconstruction using a composite collagenous prosthesisThe American Journal of Sports Medicine, 1992
- Degradable implant materials: A review of synthetic absorbable polymers and their applicationsClinical Materials, 1986
- Biodegradable materials of poly(l-lactic acid): 1. Melt-spun and solution-spun fibresPolymer, 1982