Loose Fill Slope Stabilization with Soil Nails: Full-Scale Test
- 1 March 2008
- journal article
- Published by American Society of Civil Engineers (ASCE) in Journal of Geotechnical and Geoenvironmental Engineering
- Vol. 134 (3) , 277-288
Abstract
Soil nailing is commonly used for stabilizing cut slopes and retaining structures. The technique is, however, seldom used in stabilizing old loose fill slopes that were not constructed to the current standards. There is a concern that soil-nailed loose fill slopes may not render safety during heavy rainstorms. Little work has been carried out to investigate the behavior of soil-nailed loose fill slopes. This paper presents a comprehensive field test on a loose fill slope that was constructed by end tipping without any compaction—in the same way old fill slopes were formed. The slope was 4.75 m high, 9 m wide, and 33 deg to the horizontal. Two rows of five grouted nails were installed at a grid of 1.5 m×1.5 m at an inclination of 20 deg from the horizontal. A surface grillage was used to connect the six nails in the middle of the grid. Performance of the nailed slope was monitored with various instruments for about six months until the slope was tested to fail by surcharging and wetting. The overall result...Keywords
This publication has 6 references indexed in Scilit:
- Soil–Nail Pullout Interaction in Loose Fill MaterialsInternational Journal of Geomechanics, 2006
- Laboratory study of soil–nail interaction in loose, completely decomposed graniteCanadian Geotechnical Journal, 2004
- Ground Anchors and Soil Nails in Retaining Structures1991
- The liquefaction of sands, a collapse surface approachCanadian Geotechnical Journal, 1985
- Field Measurements of an Earth Support SystemJournal of the Geotechnical Engineering Division, 1981
- The Properties of Decomposed GraniteGéotechnique, 1962