Dry Fuel Jet Half-Angle Measurements and Correlation for an Entrained Flow Gasifier
Open Access
Abstract
Reduced order models (ROMs) are increasingly applied to entrained flow gasification development due to reduced computational requirements relative to computational fluid dynamics (CFD) models. However, they require greater a posteriori knowledge of the reactor physics. A significant parameter influencing ROM outputs is the jet half-angle of the solid fuel and oxidant mixture in the gasifier. Thus, it is important to understand the geometry of the jet in the gasifier, and how it is dependent on operating parameters, such as solid and carrier gas flow rates. In this work, an existing model for jet half-angles, which considers the ratio of surrounding gas density to jet core density, is extended to a dry solids jet with impinging gas. The model is fitted to experimental jet half-angles. The jet half-angle of a non-reactive flow was measured using laser-sheet imaging for solid fluxes in the range of 460–880 kg/m2·s and carrier gas fluxes in the range of 43–90 kg/m2·s at the transport line outlet. Jet half-angles ranged from 5.6° to 11.3°, increasing with lower solid/gas loading ratios. CFD simulations of two reactive conditions, with solid and gas fluxes similar to experiments, were used to test the applicability of the proposed jet half-angle model.Keywords
Funding Information
- Government of Canada (Program of Energy Research and Development, ecoENERGY Innovation Initiative)
This publication has 26 references indexed in Scilit:
- Dynamic reduced order modeling of an entrained-flow slagging gasifier using a new recirculation ratio correlationFuel, 2017
- Experimental Assessment, Model Validation, and Uncertainty Quantification of a Pilot-Scale GasifierIndustrial & Engineering Chemistry Research, 2016
- Reduced order modeling of a short-residence time gasifierFuel, 2015
- Parametric Analysis Using a Reactor Network Model for Petroleum Coke GasificationEnergy & Fuels, 2015
- Assessment of oxy-fuel, pre- and post-combustion-based carbon capture for future IGCC plantsApplied Energy, 2012
- A dynamic reduced order model for simulating entrained flow gasifiersFuel, 2012
- Modelling coal gasification with CFD and discrete phase methodJournal of the Energy Institute, 2006
- A CFD based combustion model of an entrained flow biomass gasifierApplied Mathematical Modelling, 2000
- Two-component LDA measurement in a two-phase turbulent jetAIAA Journal, 1984
- Particle‐gas dispersion effects in confined coaxial jetsAIChE Journal, 1975