Brewery wastewater treatment using suspended and attached growth sequencing batch reactors
Authors:
- 1 March 1999
- journal article
- research article
- Published by Taylor & Francis in Journal of Environmental Science and Health, Part A
- Vol. 34 (2) , 341-355
Abstract
Laboratory‐scale aerobic sequencing batch reactors, in both suspended‐growth and attached‐growth modes, were used to study the treatment of brewery wastewater. A Ringlace material was selected and employed for the attached‐growth reactors. Experiments were conducted over a wide range of hydraulic retention time, from 0.56 to 6.06 days. Test results demonstrated that brewery wastewater could be successfully treated using both the suspended‐growth and the attached‐growth aerobic sequencing batch reactors. Treatment efficiency in terms of TOC, BOD5, COD and SS removal of over 90% could be consistently maintained, with the suspended‐growth reactors performing significantly better than the attached‐growth reactors.Keywords
This publication has 5 references indexed in Scilit:
- Anaerobic treatment of brewery wastewater using UASB reactors seeded with activated sludgeBioresource Technology, 1998
- An alternative operational mode for the sequencing batch reactor processJournal of Environmental Science and Health . Part A: Environmental Science and Engineering and Toxicology, 1997
- High rate aerobic treatment of brewery wastewater using the jet loop reactorWater Research, 1995
- Operation conditions for anaerobic treatment of wastewater from a beer breweryJournal of Fermentation and Bioengineering, 1992
- The Application of Sequencing Batch Treatment to an Industrial WastewaterWater Quality Research Journal, 1985