Metallographic effects of pure aluminum on properties of nanoporous anodic alumina (NPAA)
Authors:
- 3 May 2013
- journal article
- conference paper
- Published by Wiley in Surface and Interface Analysis
- Vol. 45 (10) , 1490-1496
Abstract
The microstructure of aluminum substrates was investigated during the quality control of grain sizes determination and crystal orientation analysis before and after preheat (recrystallization) treatment at 500 °C, in relation to the microstructure and heat stability of nanoporous anodic alumina (NPAA) membranes formed on various preheated aluminum substrates and subsequently detached. Depending on the preheating conditions, the average grain size of the aluminum substrate increased from 3 µm to 1280 µm. Also, the preferential crystal orientation of aluminum was (311) and/or (100) or (311)/(422) or (220) under different heating conditions. Recrystallization at a higher heating rate and particularly a higher cooling rate yielded lower grain growth of the aluminum substrate, so that quenching rather than annealing resulted in smaller grains and domains as well as a larger number of grain boundaries on the top surface of related α‐NPAA membranes. This induced less ordered growth in the nanopore structure and lower stability against cracking and deflection during crystallizing α‐NPAA thin film membranes. Copyright © 2013 John Wiley & Sons, Ltd.Keywords
This publication has 16 references indexed in Scilit:
- Heat treatment of aluminum in preparing porous anodic alumina templatesMicro & Nano Letters, 2012
- Regularity of nanopores in anodic alumina formed on orientated aluminium single-crystalsMaterials Chemistry and Physics, 2011
- Assessment of the thermal stability of anodic alumina membranes at high temperaturesMaterials Chemistry and Physics, 2008
- Influence of the microstructure of the aluminum substrate on the regularity of the nanopore arrangement in an alumina layer formed by anodic oxidationSurface and Coatings Technology, 2008
- The effects of electropolishing on the nanochannel ordering of the porous anodic alumina prepared in oxalic acidJournal of Solid State Electrochemistry, 2008
- Influence of crystal orientation and surface topography of aluminum substrate on pore nucleation of anodic porous aluminaJournal of Japan Institute of Light Metals, 2008
- Self-ordering of anodic porous alumina formed in organic acid electrolytesElectrochimica Acta, 2005
- Influence of initial treatments of aluminium on the morphological features of electrochemically formed alumina membranesMaterials Science and Engineering: C, 2003
- Influence of impurities in aluminium on surface treatmentCorrosion Science, 2002
- Ordered Metal Nanohole Arrays Made by a Two-Step Replication of Honeycomb Structures of Anodic AluminaScience, 1995