Influence of Measurement Methodologies for the Volumetric Air Flow Rate of Mobile Positive Pressure Fans on Drive Unit Performance
Open Access
Abstract
Since there are no legally defined testing requirements for mobile positive pressure fans, they may be tested based on methods that do not correspond to their actual operating conditions. Adequate assessment of the technical and operating conditions for this type of equipment is particularly important for equipment used in rescue operations. Such units should be characterized by efficient and reliable operation. This article investigates the influence of measurement methods of the volumetric airflow rate on the performance of a power unit. The article shows that the applied measurement method, whether it is PN-EN ISO 5801 (test conditions in a pipe duct—Method A) or other methods, i.e., ANSI/AMCA 240-15 and testing of the characteristics of the velocity profile (tests in open flow—Method B), can cause differences in the power demand of fans of from 3.2% to 4.5%. The differences in the requirements of propulsion power translate into fuel consumption and emissions of harmful exhaust gases generated by the combustion drive units (4 kW). It was also observed that fans with conventional impellers (W1) show a lower power demand when applying Method B (open flow) tests, while fans with turbo impellers (W2) show a lower power demand when Method A (duct) tests are applied. Comparative analysis of the parameters of the drive unit in the test group of fans without taking into account the measurement method can cause errors of up to about 7.7%, 6.4%, and 2.4% for the power, torque, and speed, respectively.Keywords
This publication has 19 references indexed in Scilit:
- Impact of Compressed Natural Gas (CNG) Fuel Systems in Small Engine Wood Chippers on Exhaust Emissions and Fuel ConsumptionEnergies, 2020
- The role of real power output from farm tractor engines in determining their environmental performance in actual operating conditionsComputers and Electronics in Agriculture, 2020
- Problematic issues of quality, certification and tests of fire-fighting technical production2020
- Development of regulations, codes and standards on composite tanks for on-board gaseous hydrogen storageInternational Journal of Hydrogen Energy, 2019
- Development of a Measurement Method for the Classification and Performance Evaluation of Positive Pressure Ventilation (PPV) Fans2018
- The Use of Positive Pressure Ventilation Fans During Firefighting Operations in Underground Stations: An Experimental StudyFire Technology, 2018
- Modeling of positive pressure ventilation to prevent smoke spreading in sprinklered high-rise buildingsFire Safety Journal, 2018
- Legal regulations of restrictions of air pollution made by non-road mobile machinery—the case study for Europe: a reviewEnvironmental Science and Pollution Research, 2017
- Improvement of Positive Pressure Ventilation by optimizing stairwell door opening areaFire Safety Journal, 2017
- Exhaust emissions from small engines in handheld devicesMATEC Web of Conferences, 2017