Self-Alignment of Bottom CZTSSe by Patterning of an Al2O3 Intermediate Layer
Open Access
- 23 December 2019
- journal article
- research article
- Published by MDPI AG in Nanomaterials
- Vol. 10 (1) , 43
Abstract
When CZTSSe is synthesized using a metal precursor, large voids of nonuniform size form at Mo back contact side. Herein, we demonstrate that the voids and CZTSSe in the lower part of the CZTSSe double layer can be controlled by using an Al2O3-patterned Mo substrate. The CZTSSe in the lower part self-aligns on the Mo-exposed area, while the voids self-align on the Al2O3-coated area. The origin of the self-alignment is expected to be the difference in bonding characteristics between liquid Sn and the metal or oxide surface, e.g., Al2O3. Good wettability generally forms between nonreactive liquid metals and metal surfaces due to the strong metallic bonding. By contrast, poor wettability generally forms between nonreactive liquid metals and oxide surfaces due to the weak van der Waals bonding between the liquid metal and the oxide layer. When the patterning was added, the device efficiency tended to decrease from 8.6% to 10.5%.Keywords
Funding Information
- the KETEP and the Ministry of Trade, Industry & Energy, the Republic of Korea. (No. 20173010012980)
- the Technology Development Program to Solve Climate Changes of the National Research Foundation funded by the Ministry of Science and ICT, Republic of Korea. (2016M1A2A2936781)
This publication has 19 references indexed in Scilit:
- Improved Rear Surface Passivation of Cu(In,Ga)Se$_{\bf 2}$ Solar Cells: A Combination of an Al$_{\bf 2}$O $_{\bf 3}$ Rear Surface Passivation Layer and Nanosized Local Rear Point ContactsIEEE Journal of Photovoltaics, 2014
- Device Characteristics of CZTSSe Thin‐Film Solar Cells with 12.6% EfficiencyAdvanced Energy Materials, 2013
- Effects of Back Contact Instability on Cu2ZnSnS4 Devices and ProcessesChemistry of Materials, 2013
- The Cu–Sn phase diagram, Part I: New experimental resultsIntermetallics, 2013
- A Detrimental Reaction at the Molybdenum Back Contact in Cu2ZnSn(S,Se)4 Thin-Film Solar CellsJournal of the American Chemical Society, 2012
- The path towards a high-performance solution-processed kesterite solar cellSolar Energy Materials and Solar Cells, 2011
- Effects of residual copper selenide on CuInGaSe2 solar cellsSolid-State Electronics, 2011
- Electronic structure of secondary phases in Cu-rich CuGaSe2 solar cell devicesApplied Physics Letters, 2004
- Thin‐film solar cells: device measurements and analysisProgress in Photovoltaics: Research and Applications, 2004
- Phase equilibria in the Cu-Se systemInorganic Materials, 2000