Development of an Ultra-Low Carbon MgO Refractory Doped with α-Al2O3 Nanoparticles for the Steelmaking Industry: A Microstructural and Thermo-Mechanical Study
Authors:
- C. Gómez-RodríguezC. Gómez-Rodríguez
- G. A. Castillo-RodríguezG. A. Castillo-Rodríguez
- E. A. Rodríguez-CastellanosERE. A. Rodríguez-Castellanos
- F. J. Vázquez-RodríguezFVF. J. Vázquez-Rodríguez
- J. F. López-PeralesJ. F. López-Perales
- J. A. Aguilar-MartínezJAJ. A. Aguilar-Martínez
- D. Fernández-GonzálezD. Fernández-González
- L. V. García-QuiñonezLGL. V. García-Quiñonez
- T. K. Das-RoyTDT. K. Das-Roy
- L. F. VerdejaL. F. Verdeja
Open Access
Abstract
The effect of α-Al2O3 nanoparticles (up to 5 wt.%) on the physical, mechanical, and thermal properties, as well as on the microstructural evolution of a dense magnesia refractory is studied. Sintering temperatures at 1300, 1500, and 1600 °C are used. The physical properties of interest were bulk density and apparent porosity, which were evaluated by the Archimedes method. Thermal properties were examined by differential scanning calorimetry. The mechanical behavior was studied by cold crushing strength and microhardness tests. Finally, the microstructure and mineralogical qualitative characteristics were studied by scanning electron microscopy and X-ray diffraction, respectively. Increasing the sintering temperature resulted in improved density and reduced apparent porosity. However, as the α-Al2O3 nanoparticle content increased, the density and microhardness decreased. Microstructural observations showed that the presence of α-Al2O3 nanoparticles in the magnesia matrix induced the magnesium-aluminate spinel formation (MgAl2O4), which improved the mechanical resistance most significantly at 1500 °C.Keywords
This publication has 68 references indexed in Scilit:
- Mechanical behaviour of MgO–C refractory bricks evaluated by stress–strain curvesCeramics International, 2012
- Synthesis and characterization of nanocrystalline MgAl2O4 spinel via sucrose processMaterials Research Bulletin, 2008
- The effect of antioxidants on the oxidation behaviour of magnesia–carbon refractory bricksCeramics International, 2008
- A novel approach for magnesia hydration assessment in refractory castablesCeramics International, 2007
- Microstructure evaluation of MgO–C refractories with TiO2- and Al-additionsJournal of the European Ceramic Society, 2007
- Effect of spinel content on the properties of magnesia–spinel composite refractoryJournal of the European Ceramic Society, 2004
- Carbon Based RefractoriesJournal of the Ceramic Society of Japan, 2004
- Oxidation Protection of MgO–C Refractories by Means of Al 8 B 4 C 7Journal of the American Ceramic Society, 2001
- High‐Temperature Properties of Unburned MgO‐C Bricks Containing Al and Si PowdersJournal of the American Ceramic Society, 1998
- Effects of CaO and Al2O3 Added to MgO-C Refractories on MgO-C ReactionJournal of the Ceramic Society of Japan, 1996