Sub-grain boundary mobilities during recovery of binary Al–Mn alloys
Authors:
- 1 April 2009
- journal article
- Published by Walter de Gruyter GmbH in International Journal of Materials Research
- Vol. 100 (4) , 516-521
Abstract
The influence of Mn solute atoms on sub-grain boundary mobilities in Al has been determined by accurate electron backscatter diffraction analysis of the sub-grain sizes and misorientations during recovery annealing. High purity Al-0.1 and 0.3 wt.% Mn alloys were deformed by plane strain compression at room temperature to equivalent strains of 1.8 and annealed in the temperature range 150 – 300 °C. An original method of image analysis on sub-boundaries from electron backscatter diffraction maps was applied to quantify the sub-grain size distributions. The change in average sub-grain size with time at several temperatures was then used to estimate sub-grain boundary mobilities in both Al – Mn alloys. The activation energies for sub-grain mobility were found to be 48 and 52 and kJ mol– 1 for the 0.1 and 0.3 % Mn alloys respectively, with the higher Mn alloy exhibiting lower rates. The sub-boundary mobilities are higher than expected from previous similar work on deformed Al – Si crystals. The orientation dependence of sub-grain growth is also examined.Keywords
This publication has 14 references indexed in Scilit:
- Grain Boundary Migration in Metals2009
- Boundary Mobilities during Recovery and Recrystallization of Binary Al - Mn AlloysMaterials Science Forum, 2007
- Grain boundary mobilities during recrystallization of Al–Mn alloys as measured by in situ annealing experimentsMaterials Science and Engineering: A, 2005
- Changes in Fe and Si Solute Levels during Deformation of AA1200Materials Science Forum, 2002
- Subgrain growth and low angle boundary mobility in aluminium crystals of orientation {110}〈001〉Acta Materialia, 2000
- Quantitative metallography by electron backscattered diffractionJournal of Microscopy, 1999
- Grain Boundary Migration in Metals: Recent DevelopmentsInterface Science, 1998
- Recovery revisitedActa Metallurgica et Materialia, 1995
- On the theory of impurity controlled grain boundary motionActa Metallurgica, 1971
- The impurity-drag effect in grain boundary motionActa Metallurgica, 1962