Mechanical property degradation of notched specimen during low cycle fatigue: microstructural mechanism and constitutive model
Authors:
- Li SunLSLi Sun
- Yuran HuangYHYuran Huang
- Cheng GongCGCheng Gong
- Xian-Cheng ZhangXZXian-Cheng Zhang
- Shantung TuSTShantung Tu
Preprint
- 17 September 2026
- preprint
- Published by Elsevier in SSRN Electronic Journal
Abstract
The accurate evaluation of low cycle fatigue (LCF) damage in aero-engine turbine discs is fundamental to ensure their long-term safe operation. However, the pronounced stress concentration induced by notch, such as the groove structures at mortise joint, can accelerate the degradation of mechanical property, thereby affecting the damage evolution. Therefore, this study investigates the mechanical property degradation of GH4169 alloy notched specimens representative of a groove geometry and corresponding microstructural evolution in the notch and far-field regions throughout the cyclic process, using interrupted LCF tests followed by microstructure characterization. In comparison with the far-field region characterized by dislocation walls and cells, the notch region exhibits predominant multi-slip dislocation morphology that promotes the sustained increases in both length and density of cracks. These microstructural evolutions give rise to a rapid decline in strength and elongation of notched specimen prior to 10% lifetime fraction, a near-linear decrease from 10% to 80% lifetime fraction, and an accelerated degradation as failure approaches. Based on the experimental results, the Johnson-Cook constitutive model is modified to accurately predict the stress-strain response of notched specimen subjected to various number of cycles, from which an explicit expression of the tensile plastic strain energy density parameter was derived to develop a damage level evaluation method. This investigation is expected to provide a robust theoretical foundation for remaining life prediction and predictive maintenance of in-service high-temperature components.Keywords
This publication has 22 references indexed in Scilit:
- A comprehensive investigation on thermomechanical fatigue failure mechanism and remaining properties of 316L stainless steelEngineering Failure Analysis, 2024
- Fatigue notch strengthening effect of nickel-based single crystal superalloys under different stress ratiosEuropean Journal of Mechanics - A/Solids, 2024
- Hot Tensile Deformation Behaviour of AA2524-T3 Alloy and Prediction of Johnson–Cook Model ParametersMetals and Materials International, 2024
- Dislocation Arrangements and Cyclic Microplasticity Surrounding Stress Concentration in a Ni‐Based Single‐Crystal SuperalloyAdvanced Engineering Materials, 2023
- Determination of Parameters for Johnson-Cook Dynamic Constitutive and Damage Models for E250 Structural Steel and Experimental ValidationsJournal of Materials Engineering and Performance, 2023
- Strain-rate dependent tensile behavior of railway wheel/rail steels with equivalent fatigue damage: Experiment and constitutive modelingEngineering Fracture Mechanics, 2022
- Determination of Johnson–Cook Material Parameters for Armour Plate Using DIC and FEMMetals and Materials International, 2020
- Effects of pre-fatigue damage on mechanical properties of Q690 high-strength steelConstruction and Building Materials, 2020
- A Comparative Evaluation of the Effect of Low Cycle Fatigue and Creep–Fatigue Interaction on Surface Morphology and Tensile Properties of 316L(N) Stainless SteelMetallurgical and Materials Transactions A, 2016
- Effect of cyclic straining at elevated-temperature on static mechanical properties, microstructures and fracture behavior of nickel-based superalloy GH4145/SQInternational Journal of Fatigue, 2005