Modeling of Heat Transfer and Airflow Inside Evacuated Tube Collector With Heat Storage Media: Experimental Validation Powered by Artificial Neural Network
Authors:
- 11 November 2024
- journal article
- research article
- Published by Wiley in Heat Transfer
- Vol. 54 (2) , 1217-1231
Abstract
Solar air heater (SAH) is a widely employed technology for harnessing solar thermal energy in numerous applications. Contemporary research optimizes designs within identical spatial constraints to maximize energy output. However, there is a recognized need to conduct analytical validation to stimulate the experimental setup and formulate an artificial neural network (ANN) model to govern and predict the operation system. This investigation involved developing and assessing an evacuated tube solar air heater (ETSAH) integrated with annulus‐filled heat storage media. Furthermore, this study introduced an ANN model and analytical solution to predict performance parameters, representing a noteworthy contribution. The proposed ANN model achieved its optimal validation performance with a mean square error of 5.4018 × 10−6 after 11 epochs within 31 of training. Also, correlation findings show that the optimal architecture of a feed‐forward backpropagation is achieved when the 5‐40‐40‐40‐2 model architecture is used. In this case, there are five neural nodes in the input layer that represent timing, temperature, radiation, and airflow rate. The power output of the ETSAH device shows a strong correlation with the flow rate, reaching its peak at 0.05 kg/s with a value of 2261 W and dropping to 368 W at 0.006 kg/s. Correspondingly, the greatest energy efficiency was measured at airflow rates of 0.05, 0.01, and 0.006 kg/s, accounting for 48.38%, 27.32%, and 19.65%, respectively.Keywords
This publication has 37 references indexed in Scilit:
- A comprehensive review of fresh water production from atmospheric air – techniques, challenges and opportunitiesEnvironment, Development and Sustainability, 2024
- Fog collection rate investigation for a hydrophobic surface and different inclinations of rectangular meshesEuro-Mediterranean Journal for Environmental Integration, 2024
- Evaluating Mesh Geometry and Shade Coefficient for Fog Harvesting CollectorsWater Resources Management, 2023
- Performance analysis of a serrated absorber plate solar air heater with paraffin wax storageEnvironmental Science and Pollution Research, 2023
- A review of recent developments in the application of machine learning in solar thermal collector modellingEnvironmental Science and Pollution Research, 2022
- Prediction of outlet air characteristics and thermal performance of a symmetrical solar air heater via machine learning to develop a model-based operational control scheme—an experimental studyEnvironmental Science and Pollution Research, 2022
- Experimental study of solar air heater performance with evacuated tubes connected in series and involving nano-copper oxide/paraffin wax as thermal storage enhancerEnvironmental Science and Pollution Research, 2022
- Performance analysis of multi-gap V-roughness with staggered elements of solar air heater based on artificial neural network and experimental investigationsEnvironmental Science and Pollution Research, 2021
- A Comprehensive Review on Performance Prediction of Solar Air Heaters Using Artificial Neural NetworkAnnals of Data Science, 2019
- Heat transfer in annular passages—hydrodynamically developed turbulent flow with arbitrarily prescribed heat fluxInternational Journal of Heat and Mass Transfer, 1963