Microstructural investigation of the oxide formed on TP 347H FG during long‐term steam oxidation
Authors:
- 2 August 2010
- journal article
- research article
- Published by Wiley in Materials and Corrosion
- Vol. 61 (8) , 665-675
Abstract
The long‐term oxidation behaviour of TP347H FG in ultra supercritical steam conditions was assessed by exposing the steel in test superheater loops in a Danish coal‐fired power plant and characterising the oxide layer with reflective light and electron microscopy. Double layered oxide scales formed during steam oxidation. TEM investigations reveal that the inner oxide layer consists of particles of metallic Ni/Fe and FeCr spinel in the interior of the former alloy grains and a compact layer of FeCr spinel and Cr2O3 along the former alloy grain boundaries. The morphology suggests that the inner layer grows by internal oxidation of the interior of the alloy grains. The thickness of the inner oxide layer did not change significantly with oxidation time and temperature for exposure times up to 30 000 h. Faster Cr diffusion within the fine‐grained alloy at higher temperatures is held responsible for this observation. This hypothesis is supported by kinetic data. The oxide thickness at low and high temperatures after 58 000 h exposure was higher than expected.Keywords
This publication has 24 references indexed in Scilit:
- Steam Oxidation of TP 347H FG in Power PlantsMaterials Science Forum, 2006
- Long term steam oxidation of TP 347H FG in power plantsMaterials at High Temperatures, 2005
- Investigation on steam oxidation behaviour of TP347H FG Part 1: Exposure at 256 barMaterials and Corrosion, 2005
- The influence of laboratory test procedures on scale growth kinetics and microstructure during steam oxidation testingMaterials at High Temperatures, 2005
- Superheater Materials Testing for USC Boilers: Steam Side Oxidation Rate of 9 Advanced Materials in Industrial ConditionsMaterials Science Forum, 2001
- Limits of the oxidation resistance of several heat-resistant steels under isothermal and cyclic oxidation as well as under creep in air at 650°CMaterials at High Temperatures, 1997
- Scaling of Austenitic Stainless Steels and Nickel-Base Alloys in High-Temperature Steam at 973 KCorrosion, 1991
- Internal-external transition for the oxidation of Fe-Cr-Ni austenitic stainless steels in steamOxidation of Metals, 1989
- Stratified oxide scale growth on two Cr-Ni steels oxidized in high-pressure steam at 800 COxidation of Metals, 1970
- A study of the Cr-depleted surface layers formed on four Cr-Ni steels during oxidation in steam at 600 C and 800 COxidation of Metals, 1970