Improved Yield and Electrical Properties of Poly(Lactic Acid)/Carbon Nanotube Composites by Shear and Anneal
Open Access
Abstract
Shear and thermal processing can greatly influence nanoparticles’ orientation and dispersion, affecting the nanocomposites’ conductivity and mechanical properties. The synergistic effects of shear flow and Carbon nanotubes (CNTs) nucleating ability on the crystallization mechanisms have been proven. In this study, Polylactic acid/Carbon nanotubes (PLA/CNTs) nanocomposites were produced by three different molding methods: compression molding (CM), conventional injection molding (IM), and interval injection molding (IntM). Solid annealing at 80 °C for 4 h and pre-melt annealing at 120 °C for 3 h was applied to research the CNTs’ nucleation effect and the crystallized volume exclusion effect on the electrical conductivity and mechanical properties. The volume exclusion effect only significantly impacts the oriented CNTs, causing the conductivity along the transverse direction to rise by about seven orders of magnitude. In addition, the tensile modulus of the nanocomposites decreases with the increased crystallinity, while the tensile strength and modulus decrease.Keywords
Funding Information
- Education Department of Shaanxi Province (22JK0316, 2023-JC-QN-0593, 2023-YBGY-385)
- Nature Science Foundation of Shaanxi province (22JK0316, 2023-JC-QN-0593, 2023-YBGY-385)
This publication has 34 references indexed in Scilit:
- Structural Polymer-Based Carbon Nanotube Composite Fibers: Understanding the Processing–Structure–Performance RelationshipMaterials, 2013
- Structure and Morphology Control in Crystalline Polymer–Carbon Nanotube NanocompositesMacromolecules, 2013
- Shear Flow and Carbon Nanotubes Synergistically Induced Nonisothermal Crystallization of Poly(lactic acid) and Its Application in Injection MoldingBiomacromolecules, 2012
- The electrical properties and crystallization of stereocomplex poly(lactic acid) filled with carbon nanotubesPolymer, 2012
- Combined electrical and rheological properties of shear induced multiwall carbon nanotube agglomerates in epoxy suspensionsEuropean Polymer Journal, 2011
- Crystalline structure of annealed polylactic acid and its relation to processingExpress Polymer Letters, 2010
- Carbon Nanotube/Isotactic Polypropylene Composites Prepared by Latex Technology: Morphology Analysis of CNT-Induced NucleationMacromolecules, 2008
- Shear induced crystallization of poly(m-xylylene adipamide) with and without nucleating additivesPolymer, 2007
- Single wall carbon nanotube templated oriented crystallization of poly(vinyl alcohol)Polymer, 2006
- Investigation of the structure of solution grown crystals of lactide copolymers by means of chemical reactionsColloid and Polymer Science, 1973