Synthesis of nano- alumina powder from impure kaolin and its application for arsenite removal from aqueous solutions
Open Access
- 16 July 2013
- journal article
- Published by Springer Nature in Journal of Environmental Health Science and Engineering
- Vol. 11 (1) , 19
Abstract
Adsorption is considered a cost-effective procedure, safer to handle with high removal efficiency. Activated alumina is the most commonly used adsorbent for the removal of arsenic from aqueous solutions. However, activated alumina has a low adsorption capacity and acts kinetically in a slow manner. An ideal adsorbent should have a high surface area, physical and/or chemical stability and be inexpensive. To meet this requirement, nanomeso porous γ-alumina with a high surface area (201.53 m2/g) and small particle size (22–36 nm) was prepared from inexpensive kaolin as the raw material, by precipitation method. The research results showed that adsorbent has the high adsorption capacity (for initial arsenite concentration up to 10 mg/L, in which 97.65% recovery was achieved). Optimal experimental conditions including pH, initial arsenite concentration and contact time were determined. Langmuir, Freundlich and Dubinin– Radushkevich isotherm models were applied to analyze the experimental data. The best interpretation for the experimental data was given by Langmuir adsorption isotherm equation and the maximum arsenite adsorbed by synthesized nano γ–alumina (qe) was found to be 40 (mg/g).Keywords
This publication has 40 references indexed in Scilit:
- Kinetics of adsorption of metal ions on inorganic materials: A reviewAdvances in Colloid and Interface Science, 2011
- Conventional oxidation treatments for the removal of arsenic with chlorine dioxide, hypochlorite, potassium permanganate and monochloramineWater Research, 2010
- Removal of divalent heavy metals (Cd, Cu, Pb, and Zn) and arsenic(III) from aqueous solutions using scoria: Kinetics and equilibria of sorptionJournal of Hazardous Materials, 2009
- Removal of arsenic (III) and arsenic (V) from aqueous medium using chitosan-coated biosorbentWater Research, 2008
- Low‐Temperature Synthesis of γ‐Alumina Nanocrystals from Aluminum Acetylacetonate in Nonaqueous MediaSmall, 2007
- Total Arsenic Accumulation in Yabbies (Cherax destructor Clark) Exposed to Elevated Arsenic in Victorian Gold Mining AreasEnvironmental Toxicology and Chemistry, 2007
- A review of the source, behaviour and distribution of arsenic in natural watersApplied Geochemistry, 2002
- Kinetic-spectrophotometric determination of trace amounts of As(III) based on its inhibitory effect on the redox reaction between bromate and hydrochloric acidTalanta, 2001
- Pseudo-second order model for sorption processesProcess Biochemistry, 1999
- Estimation of the point of zero charge of simple and mixed oxides by mass titrationPowder Technology, 1999