SCRAPED SURFACE HEAT EXCHANGERS
Author:
- Magnus HärrödMHMagnus Härröd
- 30 January 1986
- journal article
- Published by Wiley in Journal of Food Process Engineering
- Vol. 9 (1) , 1-62
Abstract
In this literature survey flow patterns, mixing effects, heat transfer and power required for rotation in scraped surface heat exchangers (SSHE) are thoroughly discussed, with the emphasis on assumptions and results, while the principal design of different SSHEs are only briefly discussed.The flow patterns control the desired radial mixing and the undesired axial mixing. the flow in a SSHE can be regarded as the sum of an axial flow and a rotational flow. the axial flow is laminar and the rotational flow is laminar or vortical.With laminar flow the radial mixing is poor, which causes poor heat transfer and allows the axial flow profile to control the residence time distribution. the precise onset of vortical flow in a SSHE is hard to predict. the vortical flow makes the radial mixing very efficient, giving good heat transfer and perhaps plug flow behavior. However, vortical flow also causes axial mixing which reduces the apparent heat transfer coefficient and increases the residence time distribution.The power required to rotate the shaft and blades is mainly determined by the design of the blades.Keywords
This publication has 96 references indexed in Scilit:
- Structure dynamique et transfert de matiere liquide-paroi dans le cas de l’ecoulement laminaire tourbillonnaire de Couette-PoiseuilleInternational Journal of Heat and Mass Transfer, 1983
- The stability of viscous flow between rotating concentric cylinders with an axial flowProceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 1979
- A Reynolds analogy solution for the heat transfer characteristics of combined Taylor vortex and axial flowsInternational Journal of Heat and Mass Transfer, 1979
- The stability of viscous axial flow in an annulus with a rotating inner cylinderProceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 1977
- Heat/mass transfer in taylor vortex flow with constant axial flow ratesInternational Journal of Heat and Mass Transfer, 1977
- Tangential flow development for laminar axial flow in an annulus with a rotating inner cylinderProceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 1972
- The Developing Laminar Flow and Pressure Drop in the Entrance Region of Annular DuctsJournal of Basic Engineering, 1964
- Stability of Flow Between Arbitrarily Spaced Concentric Cylindrical Surfaces Including the Effect of a Radial Temperature GradientJournal of Applied Mechanics, 1964
- Studies of the Developing Flow Between Concentric Cylinders With the Inner Cylinder RotatingJournal of Heat Transfer, 1964
- Resistance of a Flow through an Annulus with an Inner Rotating CylinderBulletin of JSME, 1962