Experimental and Theoretical Studies of Sonically Prepared Cu–Y, Cu–USY and Cu–ZSM-5 Catalysts for SCR deNOx
Authors:
- Przemysław J. JodłowskiPrzemysław J. Jodłowski
- Izabela CzekajIzabela Czekaj
- Patrycja StachurskaPSPatrycja Stachurska
- Łukasz KuterasińskiŁKŁukasz Kuterasiński
- Lucjan ChmielarzLucjan Chmielarz
- Roman J. JędrzejczykRJRoman J. Jędrzejczyk
- Piotr JeleńPJPiotr Jeleń
- Maciej SitarzMaciej Sitarz
- Sylwia GóreckaSGSylwia Górecka
- Michal MazurMMMichal Mazur
- Izabela KurzydymIKIzabela Kurzydym
Open Access
Abstract
The objective of our study was to prepare Y-, USY- and ZSM-5-based catalysts by hydrothermal synthesis, followed by copper active-phase deposition by either conventional ion-exchange or ultrasonic irradiation. The resulting materials were characterized by XRD, BET, SEM, TEM, Raman, UV-Vis, monitoring ammonia and nitrogen oxide sorption by FT-IR and Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS). XRD data confirmed the purity and structure of the Y/USY or ZSM-5 zeolites. The nitrogen and ammonia sorption results indicated that the materials were highly porous and acidic. The metallic active phase was found in the form of cations in ion-exchanged zeolites and in the form of nanoparticle metal oxides in sonochemically prepared catalysts. The latter showed full activity and high stability in the SCR deNOx reaction. The faujasite-based catalysts were fully active at 200–400 °C, whereas the ZSM-5-based catalysts reached 100% activity at 400–500 °C. Our in situ DRIFTS experiments revealed that Cu–O(NO) and Cu–NH3 were intermediates, also indicating the role of Brønsted sites in the formation of NH4NO3. Furthermore, the results from our experimental in situ spectroscopic studies were compared with DFT models. Overall, our findings suggest two possible mechanisms for the deNOx reaction, depending on the method of catalyst preparation (i.e., conventional ion-exchange vs. ultrasonic irradiation).Keywords
Funding Information
- Narodowe Centrum Badań i Rozwoju (LIDER/204/L-6/14/NCBR/2015)
- Narodowe Centrum Nauki (2015/17/D/ ST8/01252)
- Grantová Agentura České Republiky (CZ.02.1.01/0.0/ 0.0/15_003/0000417-CUCAM)
- Narodowa Agencja Wymiany Akademickiej (PPI/PRO/2019/1/00018/U/00001)
- Infrastruktura PL-Grid (Zeodesign2021)
This publication has 79 references indexed in Scilit:
- High activity of mononuclear copper present in the framework of CuSiBEA zeolites in the selective catalytic reduction of NO with NH 3Microporous and Mesoporous Materials, 2016
- Cu and Fe modified derivatives of 2D MWW-type zeolites (MCM-22, ITQ-2 and MCM-36) as new catalysts for DeNO x processApplied Catalysis B: Environment and Energy, 2015
- In-situ hydrothermal synthesis of Cu-SSZ-13/cordierite for the catalytic removal of NO from diesel vehicles by NH3Chemical Engineering Journal, 2015
- Influence of the washcoat characteristics on NH3-SCR behavior of Cu-zeolite monolithsCatalysis Today, 2013
- Characteristics of the simultaneous removal of PM and NOx using CuNb-ZSM-5 coated on diesel particulate filterJournal of Industrial and Engineering Chemistry, 2013
- Advantages of a wire gauze structured reactor with a zeolite (Cu-USY) catalyst for NH3-SCR of NOChemical Engineering Journal, 2013
- Effect of ZrO2 addition on de-NOx performance of Cu-ZSM-5 for SCR catalystChemical Engineering Journal, 2012
- Alkali resistant Cu/zeolite deNO catalysts for flue gas cleaning in biomass fired applicationsApplied Catalysis B: Environment and Energy, 2011
- Selective Catalytic Reduction of NOx with N-Free ReductantsChemical Reviews, 1995
- Formation and control of nitrogen oxidesCatalysis Today, 1988